devid

This topic is all about “How to plunge a toilet?” why? Because many people don’t think twice about using the toilet for weeks, months, or even years. Toilets are the least attentive thing in our home as well as important but we never give attention to them until and unless it starts clogging. The instant it clogs, however, the toilet becomes the center of attention. While most homeowners are wise enough to keep a plunger somewhere in the house—if not in the bathroom itself, then perhaps in the linen closet or basement—a remarkable proportion don’t actually know how to plunge a toilet with a plunger. The correct technique is easy to master. Certainly, practice makes perfect, but just about anyone can capably handle the task. But before hopping to the methods to unclog a toilet on your own with a toilet plunger. You are required to know a few important things and the techniques to use that in a proper way. So, let’s get started 

Things To Know Before Acknowledging “How To Plunge A Toilet?”

When you start, be certain you have the appropriate plunger for the task. There are numerous sorts of plungers for various types of sewage fittings, trust me or not. A cup plunger, often known as a sink plunger, is by far the most simple kind. It features a flat base and a roof-shaped rubber top. Since the flat bottom provides a seal all around a relatively level sink or tub bowl, this kind is excellent for basins and tubs.

A toilet plunger, also known as a flange plunger, is the correct instrument for plunging a toilet. The cup on this is taller than the bowl on a sink plunger, and has a handle-like projection on the base of the cup, called the flange. For a proper seal, the flange fits into the hole of your toilet bowl. The edge of the plunger may also compress into the cup, allowing it to be used in the basins/sink and bathtubs. A cup plunger is ineffective in removing toilet blockages, therefore you’ll need a flange plunger for this job.

How To Plunge a Toilet to Unclog It Easily?

There are 6 different methods to unclog a toilet, some use the plunger and some don’t. But all of them are effective. Some of them are related to DIY techniques. Use any one or all of them until your toilet gets unclogged. Every method has some tools and materials that conclude the method and give you a clean and clear method. 

Method 1: Plunging the Toilet 

Tools and Materials: A Toilet Plunger, A Pair of Rubber Gloves, a Bucket of Water, 

1. Make Sure the Toilet Doesn’t Overflow 

Don’t flush again if your toilet doesn’t flush correctly after one flush. Additional water will be poured into the toilet bowl as a result of this. Remove the toilet tank lid and shut the toilet flapper properly. Extra water will not reach the bowl if the flapper is closed.

• The flapper resembles a round drain stopper with a chain attached to it.
• It’s acceptable to place your finger inside the container to seal the valve because the water isn’t filthy.

2. Get the Toilet Ready 

If there is any spillage, lay tissues or paper, or rags on the ground to absorb the moisture. The paper makes cleaning simpler afterward. You should either open the window or use a ventilation fan to eliminate the smell.

• Put on a pair of rubber gloves if the blockage is severe. Bathrooms are filthy, but a decent pair of rubber wiping gloves will keep you safe from the bacteria that lurk inside. Select gloves that are long enough to reach your elbows.
• You might also like to slip on an extra pair of clothes in case it goes a little dirty.

3. See If You Really Can Remove The Impediment 

If you see what’s causing the blockage, go in and attempt to erase anything from the commode. Avoid the plunge and move directly to some other approach if you can’t pick it up with your fingers but believe there’s something (as in a kid’s toy) creating the blockage.

4. Make Sure You’re Using an Elevated Plunger to Plunge a Toilet

A big, thick rubber plunger, whether ball-shaped or by a wrap rubber flange on the base that forms a seal, is required. Will not use a compressed air plunger that is tiny and inexpensive. These are frequently ineffective. While using the plunger, run it under heated water. This will soften it and aid in the creation of a sealing.

5. Plunge Into the Bowl Using the Plunger 

Make absolutely sure the plunger fits the area entirely. To be functional, the plunger must be immersed in water. It is critical to push and draw water through the aperture rather than air. If necessary, fill the dish with water from the sink.

• Place the Toilet plunger over the hole and press down. Slowly begin, as the first dive will force air into the basin. 
• To dislodge and disrupt the blockage, push down and then lift up quickly. Lift the water up and down with the plunger as much as you can till it drains. 
• The toilet may take 15 to 20 cycles to flush. Patience is required. Plunging alone can frequently be enough if you’re confident there’s no solid item in the way. 
• This may not function right away, but will eventually. It may not function right away, but it usually does after a few constant attempts and flushings, each including hundreds of plunge rounds.

6. Test the Drainage by Flushing The Toilet 

Once plunging ultimately empties the bowl however the blockage still prevents seamless passage down the sewer, removing the plunger and refilling the pan with water. Bring it up to the point where it should be after a typical flush, then plunge it once more. If you have persistent blockages, you may need to repeat the process.

Method 2: Use Any Enzyme Products

Tools & Materials: Waste Removal Enzyme, A Pair of Rubber Gloves

1. Purchase a Waste Elimination Enzyme Solution

Find a product that has a combination of waste-liquifying enzymes. Septic systems employ such enzymes to decompose trash. Products of this nature may generally be found in or around the piping section of hardware stores. Since enzyme waste disposal does not affect your pipelines or the ecosystem, it is superior to utilizing a drain-clearing agent. This technique is only effective on biological trash; it would not operate on toys or other things.

2 Observe The Package’s Directions 

Fill the toilet bowl with the enzyme solution in the suggested quantity. Usually, you will indeed be told to wait longer for the enzyme to begin working on the blockage. Once the blockage has been removed, the toilet should drain normally.

Method 3: Make Your Own Drain Cleaner

Tools & Materials: ½ gallon of Water, 2 Cups of Vinegar, 1 cup of Baking Soda, 

1. Half a Gallon of Water Should be Heated. 

If the toilet clogs frequently as a consequence of attempting to eliminate too much trash, a solution of heated water, baking soda, and vinegar can typically replace a professional cleaning solution. Heat half a gallon of water, then set it to leave to cool while you finish assembling the toilet bowl.

• At least 50 percent water within a gallon is required. A tiny volume of water will not operate since the power required to drive through the blockage is insufficient.
• The water should never be warmer than a cup of hot tea that you can easily consume. This should not be boiling, as this might cause ceramics to break. You want to elevate the temperature of the water that is flowing through the blockage or pushing against it.

2. Fill the Toilet with 1 Cup Baking Soda and 2 Cups Vinegar

Baking soda and vinegar generate a chemical reaction that aids in the removal of blockages. Although purified white vinegar is frequently utilized, any vinegar will suffice.

• There will be a lot of fizz in the combination. If you will not have sodium bicarbonate or vinegar available, a couple of sprays of dish detergent in the toilet bowl would suffice. The soap may aid in the unclogging of the blockage. 
• For blockages produced by a solid blockage, or by a toy, this approach is unlikely to succeed.

3. Fill the Dish Halfway With Boiling Water

Instead of pouring it from the rim, pour it from the waist level. The force of the water flowing into the bowl might aid in the clog’s removal.

4. Set Aside the Solution Overnight 

The flood should have emptied before dawn. Clogs produced by organic debris should be cleared using this homemade drain cleaner. If the water won’t flush on the second try, the blockage might be caused by a hard object. Use a wire coat hanger or a drain snake to unclog the drain.

Method 4: Use A Plumbing Snake

Tools & Material: Plumbing Snake, A Pair of Rubber Gloves

1. Get a Plumbing Snake or Borrow One

A plumbing snake (also known as a “flexible cleaning tool” or “auger”) is an adaptable coil of wire which can “snake” around the bends of a pipe and reach depths beyond what a wire can. A “closet auger,” that is intended to remove toilet blockages to avoid harming or discoloring the bowl, is the ideal snake. A closet auger would most likely be used by a plumber.

2. Place One of the Snake’s Ends in the Sewer 

Push it down and send the snake farther into the pipe until you reach a blockage.

3. Rotate the Snake and Force it Past the Blockage 

The aim is to part ways the blockage into tiny enough bits to pass it through tubes. Clearing the obstacle may require a few moments of maneuvering. Flush the toilet after the water has drained to determine if it drains as rapidly as it should.

4. Reversed Snake 

It could be required to take out the toilet and run the snake in reverse directions. This is particularly true in the case of hard blockages flushed by an inquisitive youngster. Contact a professional if the clog is proven to be difficult but you’re not confident about dismantling and changing the toilet.

Methods 5: Using A Wire Coat Hanger Through the DIYer method

Tools & Material: A Wire Coat Hanger, A Pair of Rubber Gloves, a Sharp Cutter, Rag/A Small Cloth, Duct Tape

1. Align and Untangle a Wire Coat Hanger

First, you have to cut the wire straight in the middle to make it align and then wrap a cloth around the wire’s end. To hold the cloth in position, apply duct tape. This will keep the cutting tip from scratching your toilet’s porcelain. Only when there is a blockage during the first few centimeters of the drainage can the wire hanger approach work.

2. Insert the Wire’s Bundled End into the Sink 

To empty the drain, bend, press, and move the cable in a clockwise direction when it’s in the sewer. Press it against the obstacle if you really can feel it. Continue till the water starts to drain. When you’re doing this, make sure you’re using rubber gloves. As you pull the cable about, you could be drenched. The clog should be out of range of the hanger if you won’t find it and the toilet won’t empty. To remove it, use the mechanical snake approach.

3. After the Fluid has Emptied, Clean the Toilet 

The barrier should be gone, and filthy water should be free to glide freely through the pipe. If the tank is still taking a long time to empty, the clog may have moved out of range of the hook. In this scenario, you’ll have to clean it out using a piping snake.

Method 6: Use a Wet or Dry Vacuum Cleaner to Plunge a Toilet

Tools & Material: Vacuum Cleaner (Wet or Dry), A Pair of Rubber Gloves, A towel

1. Purchase or Borrow a Wet/Dry Vacuum Cleaner 

If the plunge and snaking haven’t worked, attempt using a wet/dry vacuum. Use a wet/dry vacuum cleaner that can handle water instead of a regular vacuum pump.

2 Using the Suction, Remove the Water from the Bowl. 

To suction away the blockage, the bowl has to be clear of water as well as other waste.

3 Place the Suction Hose’s Tip into the Drainage 

Put it a few centimeters into the opening of the porcelain bowl. Instead of using an adapter, merely use the flexible structure. To form a seal all around drainage, wrap an extra towel around it.

4 Start the Vacuum Cleaner 

To achieve a good seal, use one hand to apply pressure to the towels. Wait a few moments for the suction to kick in. It’s possible that the vacuum will be able to remove the obstruction.

Also, read- Most Powerful Flushing Toilet For Clean and Fresh Bathroom

Conclusion!

So, that’s it! We come up to the conclusion of this article where we explain all the information about “How to Plunge A toilet?”. The topic related to toilets is now in the mainstream but when you really need it, it’s come in handy. In this article, we tried our best to share every inch of information about unclogging a toilet with a Toilet plunger, and we did (hope so). So, if you like this article please let us know in the comment section below, and feel free to share your experience when you apply these methods to your toilet to unclog.  

FAQs

How to plunge a toilet with poop?

You can plunge into a toilet with poop. Just make sure that when you start plunging some part of the poop gets stuck in the plunger you need to remove that and carefully throw that in the garbage.

How long should I use the plunger in the toilet?

It would hardly take 10 to 20 seconds to clear the clogging in the pipe. You should do it till the pipeline gets cleared.

Why won’t my toilet unclog with a plunger?

To plunge you need more water than the air. You must ensure the proper availability of water and if still, this doesn’t work out you should try to go with the snaking process to clear the clogging.

While designing your bathroom, one of the main challenges that you might have to face is space. Putting the right thing in the right space is very important. The task gets bigger for the ones who have smaller bathroom areas and want small toilets to save some area.

If you are thinking of designing or redesigning your bathroom, but are stuck on which product to install then this blog will guide you through. First thing, you must have a rough idea before moving forward, or else this design process may get very frustrating. So, have a clear picture of how you want to transform your bathroom. The color, the curtains, the towels, the basin, and most importantly the toilet seat. Also, keep in mind that there is a limit to what a toilet seat can get. Therefore, if you have already reached the limited size of the toilet seat then, you might need to reconsider the space of your bathroom.

Tell Me the Configuration of the Small Toilets

Are you looking for small toilets in the markets for your tiny bathroom? But confused about how to prepare a perfect layout with all the specifications of the products? In this blog, we will thoroughly go through all types of toilet seats with different specifications and layouts. We won’t be discussing the designs and layouts in detail, but the proper specification of the toilets will definitely provide you with an idea about the shape and size of the toilets.

We will be exploring the various smallest gravity flush toilets on the market. We will also discuss different alternatives that will save some space in your bathroom area but before jumping into the products, it is important to first know your bathroom space better. The space you need to assign for different things. Below is a list of common dimensions and specifications that you should consider before designing your toilet area.

Find Out These Details to Install Small Toilets:

• Determine the space you need to place a toilet.
• Check the most critical dimension of the toilet, height, width, and length.
• Do proper research on the toilets from different manufacturers.
• Read all new inventions about the smallest toilet with gravity flush.
• Check out the 6-floor mount gravity flush. Also, go through the specification of the 23-½ inch short Galba model toilet.
• If none of the specifications meet your needs for the toilet then do not lose hope, there are other products too, that would help you to install one in your small bathroom.

So are you ready to explore the toilets? Let’s start the hunt!

How to Install Small Toilets Wisely to Utilise Minimum Space

Whether you have a big or small bathroom area, you must know where to place the toilets and how much space it needs. Therefore, the first thing you need to do is to select the place dedicated to the toilet space. It can be anywhere, it can be any dedicated bathroom area or any small space that you want to change into a restroom.

To begin with, you need to find out the least space you need to turn that area into a bathroom. While appointing a plumber you should also communicate with him and advise him to apply the minimum space rule. The minimum space rule is an important factor if you are already dealing with a small space. This rule allows you to efficiently use the area and make your bathroom comfortable to use.

A Quick Guide to Measure the Dimension:

• The Distance between left to right= minimum of 30 inches
• The Distance between front to back= length of the whole toilet + a minimum of 21 inches

The above specifications will help you to achieve the minimum space rule. However, it is recommended to check the local building code, since every local code is different from the others.

Dimensions of Small Toilets That You Should Consider While Buying

The height of the toilets is never an issue for small bathrooms. However, the width of the toilets should be minimum to fit in the small bathroom areas. The width should be at least 30 inches. If you have space less than that, then you must leave the idea of creating a bathroom space. Because any toilet less than that would not be comfortable to do business with. So while buying a comfortable toilet seat for your toilet, you now know what width size is best for your usage.

After discussing the width and size of the toilet, let’s now move toward the specification of the length.
If the length of your toilet is short that means the front-to-back distance of the bathroom is not much and you can not leave a clearance of 21 inches. Then you need to shift the toilet seat more towards the wall. Other than that, you can also minimize the length of the toilet to stick to the minimum rule. So before designing or restoring the toilet it is best to resort to the whole toilet design.

However, you should know that if the length of the toilet seats gets shorter then the cost of the product also gets higher. The cost depends on the inches you need to save from your bathroom. You do not need to worry, the prices are expensive but affordable. Good news, if you just want to save a few inches, about 2 to 3 inches, then a round-shaped toilet will work for you. But if you need to save more than that then get ready to empty your wallet. If spending is the only option you are left with then, we have prepared the following listicles of the best small toilets in the market.

Top Small Toilets for Your Tiny Bathroom

All those who have decided to spend a little more to give their bathroom a good look may get some amazing products in this section. Before starting your hunt for that perfect toilet for your bathroom. Here are some points you should keep in your mind.

• All the toilets we will be discussing below are two-piece toilets with a round bowl with them. The round bowl toilets are shorter in size than the ones with elongated seats. If you are getting an elongated and two-piece toilet you can not have it less than the length of 27 inches.
• In the elongated toilet, the size of the bowl is between 3 to 4 inches. Therefore, the round bowl increases a certain length of your toilet.

So if you are up for the above specification, then the next section has a great deal of treasure for you. You need to measure the whole length from the tip of the bowl of the toilet and the wall. However, according to the American Standard, the overall length is measured between the tank of the toilet and the wall including a clearance gap. Now, let’s jump to the table, that will provide you with a better idea about the different space-saving toilets.

American Standard:

TOTO:

GALBA:

The last product on the list is the dark horse, Galba. It is one of the most popular toilets among sellers and buyers. This model is a compact toilet that is shorter than the 24-inch length. If your bathroom is literally very small that you can not install a 24-inch toilet seat either, then you are left with this Galba product. So, grab it as soon as possible.
 In the next section, we have reviewed the little compact space-saving small toilets.

Review of GALBA  Toilet for Compact Bathroom

The Galba small toilets generally come in white in color. The size of the item is 24.5 x 14 x 27 inches. The whole product is made up of plastic.

Since it is a one-piece toilet, it is very easy to clean. Due to the plastic material, it would not get any scratches or rust. There is also less chance of fading and discoloring. With a comfortable height of 16.5” and a dual Siphonic flush, the whole product weighs 90 pounds. The toilet seat is in elongated shape.

Galba Features & Specifications Overview:

Features

G-Max flushing system
Dual Flush 1.6 gpf (6 lpf) & 0.8 gpf (3 lpf)
One-piece design
Self-cleaning glazed surface
Fully glazed trapway
Skirted design for easy cleaning
Shortest length (24.5″)
ELONGATED bowl (sort of) and seat
Slow closing designer seat included
MaP rating: >=300
cUPC approved
Surpasses National GB standard cleaning water test
One-year manufacturer parts warranty

Specifications

Water consumption: 1.6 gpf (6 lpf) & 0.8 gpf (3 lpf)
Trapway type: S-trap
Water Surface 6″ x 4″ (and 5.5″ high)
Trap Diameter: 2″
Seat height: The top of the seat is 16.5″ from the floor
12″ rough-in
Material: Vitreous china
Weight: 90lbs
Dimensions: 24.5″ L x 14″ W x 27″ H

Winding Up!

Hopefully, the above guide helped you to decrease your confusion and find out the best product for your use. Before getting any product make sure you have read all the specifications very carefully.

FAQs

Which flushing system is the best?

There are a lot of brands in the market which provide you with the best flushing system. What we can suggest to you is choose a toilet which has the feature of a gravity flush system.

Do plumbers recommend dual flush toilets?

Yes, one should use it. As it saves water. So, you can simply save water and reduce water bills.

What is the best toilet in the world?

There are a number of brands available in the world. You can go with any brand which has a good market name and value.

What toilet takes up the least space?

There are various toilets that take less space. Here we can enlist some for you. these top brands have various ranges of toilets.

1. TOTO
2. GALBA
3. American Standard

What makes a toilet compact?

Simple, compact toilets are toilets that take less space. Usually, they have small water bowls. piece toilet seats are meant to be compact.

How do I choose the right toilet?

Before you buy a toilet you must know what seat you need to buy, and what size you are looking for. You can simply measure the size from the wall and then extend it till you want.

Have you ever experienced a sloped toilet seat or one which can’t still be fixed in a proper place? If you ever experienced this then this article is just for you. You are measuring the toilet seat in the wrong way to buy a new one. you should probably know how to measure a toilet seat to replace or set up a new one.

It is often seen that when a toilet seat is broken or rattling people eagerly want to replace it with a new best toilet seat but you get to be outdone and buy a toilet seat that looks stylish but does not fit on your toilet bowl. In this article, we will talk about “how to measure Toilet seats to buy the perfect size for the toilet bowl?”.

Although toilet seat sizes are also available in a standard size, it is still a good idea to measure your current seat before purchasing a substitute. Begin by measuring the rear to the front of the seat. If the length is approximately 16 inches, choose a regular circular seat (41 cm). Choose an elongated seat if it’s approximately 18 in (46 cm) long. If your toilet is ancient or you’re buying a specialized seat, things get a little more difficult. Irrespective of your scenario, evaluating the seat and selecting the appropriate alternative should be a breeze!

How To Measure a Toilet Seat?

There are 3 different methods to measure a toilet seat to buy a new one perfectly aligned with the toilet bowl. 

Method 1: Take the Measurement for a basic seat

Step 1: From either the bolts towards the front, take measurements of the seat

Put one tip of a tape measure on the bolts that attach the seat to the vase on the rear of the seat. Take measurements of the seat by drawing the other end of the line through the very point of the front of the bowl. 

• Make sure you check down the middle of the pan. 
• To get an actual estimation, align the meter stick with the bolt centers. Pull the acrylic conceals if required to see the bolts. Use a plain-head screwdriver to push off the lids if you can’t pry them up using your fingertips.
• Consider the toilet seat to be a clock. From the middle of each edge, either clockwise measure the length.

Step 2: Determine the distance between both the rear of the seat’s bolts 

• If the bolts are hidden under flaps that haven’t been raised, pry them up using your hands or a flat-head screwdriver. Then determine the bolt spread or the distance between the mounting bolts’ centers.  
• The usual bolt spread in the United States is 5 12 in (14 cm), however, other versions have spreads of 7 to 10 in (18 to 25 cm). If the dimensions of your toilet aren’t conventional, you might have to buy a seat directly from the manufacturer. 
• The typical bolt spread in Europe is around 6 to 6 12 in (15 to 17 cm)

Step 3: Obtain a measurement of the seat’s breadth 

• To locate the finest substitute seat, check the breadth. Place one tip of the tape measure in the center of the left edge of the seat and the other side on the right-hand side. Take measurements between the outside borders of the seats’ edges, keeping the tape centered.
• Make sure to take your measurements from the middle of the sides, or even from 9 a.m. to 3 p.m.
• Although toilet dimensions are standardized, there may be minor differences across brands. Unless you’re upgrading a seat, gauging the breadth will assist you in finding the best fit.

Method 2: Measuring Toilet For Special Seat

Step 1: Measure the distance between the two bolt holes 

• Place the meter stick in the middle of the fastener holes. As directly as possible, calculate the length between both bolt holes’ centers.
• When purchasing a custom seat, bolt width is the most essential parameter. You may need to buy a specialized seat from the toilet’s maker if the bolt spacing isn’t an American standard toilets of 5 12 in (14 cm) or a European standard toilet of 6 to 6 12 in (15 to 17 cm).

Step 2: Take measurements and the width of the basin.

• Bring one end of the measuring tape to the front of the bowl and align it with the centers of the bolt holes.
• The shortest path between the bolt holes and the reservoir is required for bidet connections, elevated seats, seat warmers, and other specialized seats. 
• Check online for specs and necessary clearances for an item you’re keen to buy before investing in a specialized seat. You don’t want to waste money on a toilet seat that doesn’t fit your toilet.

Step 3: Whether you’re purchasing a snap-on adapter, measure the current seat

• Accessible elevated chairs for individuals with impairments and toilet training seats are examples of connections. Measure the length and width of your current seat and purchase with the same specifications. 
• Although you can identify the form of your toilet merely by gazing at it, you should still examine it to make sure the accessibility or potty learning seat fits snuggly.
• Some additions are hinged-fixed or attached using the current seat’s mounting bolts, but most items clamp onto the seat. Assess the bolt width of your toilet, as well as the entire length of the seat, if needed.

Method 3: Select A New Toilet Seat

Step 1. If the length of your bowl is somewhere around 16 12 inches, choose a circular seat (42 cm) 

• Current seat dimensions in the United States are standardized. The seat is circular if it is between 16 and 17 inches (41 and 43 cm). Further than probably, you’ll be able to find a seat from a hardware or household equipment retailer that will suit your toilet.
• With your human eye, one can generally discern the difference between round and elongated seats but never pays to double-check. You might be able to avoid making a second visit to the shop if you take samples.

Step 2. If the bowl’s diameter is approximately 18 12 inches, use an extended seat (47 cm) 

The typical size for extended chairs in the United States is 18 to 19 12 inches (46 to 50 cm). Elongated seats are easily identified, but like circular seats, it’s a good idea to find the length, bolt spread, and breadth of the seat to be cautious.

Step 3. If you have a Euro toilet, get a seat that fits the bowl form

European bowls are often rounded, pointy, or D-shaped, and these forms are pretty straightforward to recognize. Because the normal length for each form is around 17 in (43 cm), obtaining a new seat simply comes down to knowing the right shape.

Step 4. If your toilet isn’t standard, look up the manufacturer and model 

• While current toilet seat measurements are regulated, you may find that the proportions of your ancient toilet are entirely different. Older seats could be available online or via specialist plumbing vendors. Look for the brand and model of your toilet online, or use phrases like “toilet seat 8 in (20 cm) bolt spread.” 
• A few modern versions have non-standard proportions as well. Corresponding toilet seats may be found online or ordered straight from the manufacturer of these toilets.
• Remove the tank lid, turn it over, and check for a brand name and product code to determine your toilet’s model number.
• Take a flashlight and check inside the tank for the make and model if the model cannot be found on the tank lid.

Read Also- Best Portable Composting Toilet: All The New Guide For 2022

Conclusion!

Here it is! This article concludes here. We tried our best to give you all the information about “ How to Measure a Toilet seat?” In this article, we told you about 3 different methods for 3 different toilet seats and their measurement tricks. If you are willing to buy a new toilet seat for your old toilet because the old toilet seat gets damaged then the measurement plays a crucial part before buying one. If our article helped you with its informative data then let us know in the comment section below. 

FAQs

What is the standard toilet seat size?

The standard size of a toilet seat must be 18 inches in height and 10 to 13 inches in width.

Do all toilet seats fit all toilets?

No, not all sizes are the same. You just measure the size before buying a toilet seat.

How do I know what kind of toilet seat I have?

There are two kinds of toilet seats: round and elongated. Just measure the length and the breath if it measures differently than simply it is an elongated one.