90% of crucial world diseases are water-borne. We can’t deny that drinking safe and pure water is our first choice to keep those diseases away. Talking about drinking safely, a water purifier is a must thing in our kitchen to avoid the pollution afflicted water. And when it comes to the choice of Water Purifier, we always prefer RO water purifier. But when it stops working it becomes a headache for many of us, right? If you are also an RO customer and facing the same problem then here is the most useful thing for you. When you find your RO Water Purifier Not Working- carving for a solution comes naturally.
And that’s why we are here to help you with your RO purifier. All you need to do is scroll down and give us a few minutes. We will unveil the reason behind this issue and the tricks of fixing your RO Water Purifier one by one.
So, Guys make a note!
What Cause RO Water Purifier Not Working?
So many reasons are there that can cause your RO Water Purifier Not Working issue. If you get a vivid idea about the causes, then it will be easy for you to remove the root and fix your Ro Water Purifier.
Sometimes this issue can breed another tantrum of your purifier like an RO Booster Pump Not Working problem or something like this. However, when you are getting the full overview in your grip then why worry?
So, let’s know the causes and related fixes now.
Power Supply Issue
The first thing that comes first is the power supply issue. If there is any kind of problem in supplying power or problem in the consumption of power in RO, it’s going to land up on RO Water Purifier Stopped Working issue.
Hence, you need to check the plug and make sure that it is inserted properly. You can use a taster to check whether there is a sufficient amount of power supply or not! Also, check if there is any loose connection and fix it as soon as possible.
Lack of Supply of Feed Water
The next thing you need to check is your diverter valve, whether you have switched it off accidentally or not. As in, this valve supplies water to your RO. And when there is sufficient water in it, RO cuts the supply automatically. But if you switch it off from outside then there will be a lack of supply of feed water. So, there can be a huge possibility of raising this issue.
Also, check the other water connection of your house. If there is no issue in the water supply, still your RO lacks performance then you should go for further processes to make sure you check each thing that is related to your RO and that can cause RO Water Purifier Not Working issue.
Check the SMPS Adapter
Sometimes, your SMPS Adapter can play a major role in damaging your RO. High Voltage fluctuation can burn out this adapter. So, in this condition, you need to replace your SMPS. An electrician or a mechanic will be enough to fix this issue.
However, this adapter plays a big part in supplying you with purified water through your RO because your RO booster pump works depending on this adapter. So, if there is a problem in your SMPS try to fix it as soon as possible.
Low-pressure Switch Issue
When the input water pressure is set to a certain pre-defined level- only then your RO Water Purifier works. In case of this pressure dropping the low-pressure switch cuts off the RO machine and makes it unusable.
So, you need to make sure that the RO pump is not becoming dry. Ro will be able to replace this switch without any extra effort. You need to make sure that the level of feed water pressure stays within a specified limit. Just do this little and get your RO fixed.
If the issue persists then you must search for another reason that can lead to RO Water Purifier Not Working problem.
An Issue in the Solenoid Valve
The flow of wastewater into the RO membrane gets stopped when you switch off your RO. When this solenoid valve shorts out, it stops the flow of water into the RO membrane. When this solenoid valve shorts out, it causes some permanent damage. As in, this valve stops the flow of water into the RO membrane permanently. And this one is a serious issue that leads to the RO Water Purifier Not Working problem.
Malfunctions in the Float Valve
Generally, the RO Stops Working when the internal storage tank becomes full. And this mechanism is there to prevent the water from overflowing. The float valve tends to shut off the machine automatically in this case.
Whenever you start using the water, the internal tank starts getting empty. And RO starts working again to refill the tank. But when there is a malfunction in the float valve, the RO machine gets shut off completely. So, check that float valve and make sure it is working properly to prevent the issue.
Air Vacuum Causes The Damage
It’s a very rare fact that any kind of air vacuum gets inside your RO. But when you see that all those above-mentioned technical disputes are not found, then this one is the last thing to take the responsibility of damaging your RO Water Purifier.
Generally, technicians make sure that all the pipes fit tightly. Still, you need to check for an air vacuum. Because there might be a loose fitting somewhere, you never know. This air vacuum will cause the RO Pump to suck air, and this air gets stuck into the RO machine and stops it from working properly.
However, sometimes the pre-bowl filter also gets blocked. When something like that happens, it creates a vacuum inside your water purifier and stops water to pass into the RO. In this case, the airlock is the main culprit leading to the issue RO Machine stops working.
EndNote
Well, now you have a clear idea of what can go wrong with your RO water purifier. So, check all the areas mentioned here. And remove the cause to prevent the not working issue. If you find something critical or a major issue is there, then you must go for technical help from a skilled professional. One more thing, don’t forget to share your opinion in the comment box. You can even check out Water Purifier Maintenance AMC and more to get a clear picture.
FAQs
Why is the RO purifier not working?
There are numerous reasons affecting RO to not work efficiently. For instance, inadequate electricity and water supply could lead to a problem. Anti-vacuum and the malfunction in loathing valves etc. are some causes that prevent it from working.
Why is my water purifier so slow?
Blocked filters are the most common reason for the slow flow rate of water. Clogged filters affect the efficiency of RO. If you are facing the same issue then you should check the carbon block sediments in the filter.
Can you add air to a full RO tank?
No. Drain the water tank first using a pressure gauge to determine the pressure in the tank. Add a small amount of air at a time. if not done this way it will rapture the air bladder.