• Skip to primary navigation
  • Skip to main content
  • Skip to footer

  • Home
  • Toilet
    • Best Toilet Seats
    • Best Portable Composting Toilet
    • Most Powerful Flushing Toilet
    • Best Touchless Toilet
    • 11 Best Low Flow Toilets to Save Water
    • Best Corner Toilets
    • Best Toilets That Don’t Clog
    • Best Smart Toilets
    • Toilets for Disabled Person
    • Best Comfort Height Toilet
  • Toiletries
    • Best Toilet Brush
    • Best Septic Safe Toilet Paper
    • Best Toilet Wax Ring
    • Guide to Purchase Toilet Seats
  • Water Purifier
    • Kent RO Water Purifiers Price
    • Under Sink RO
    • Water Purifiers under 5000
    • 5 Kent Water Purifier Price List
    • Non-Electric Water Purifiers
    • AO Smith Water Purifier
    • Water Purifier with hot and cold water dispenser
    • Pureit Water Purifiers Price List
    • LivPure Water Purifier Price List
    • LG Water Purifiers Price List
    • Havells water Purifier Price List
    • Bluestar Water Purifiers Price list
    • Water Purifiers in India under Rs.10000
    • Water Purifiers in India under 15000
    • Best Water Dispensers in India
    • Aquaguard Water Purifiers Price List 2022
    • Water purifiers in India in 2022
  • Guide
  • Affiliate Disclosures

devid

How to Unclog a Toilet Without a Plunger- 10 Quick Ways

September 11, 2021 by devid

In this pandemic period, where you constantly hear about a new virus, it becomes mandatory to keep the cleanliness of our surroundings. You may keep your house clean but it is not efficient enough unless there is not a clean or safe bathroom. Toilet seats and their cleanliness matter the most for individuals like you who want to tackle the aftereffects of viruses. Many of you might prefer to mop your bathroom tiles, and floors with some detergents and soaps. But, that proves to be inefficient if you do not provide proper care to a clogged toilet. Well, we can think about how you are feeling when seeing a clogged toilet that can be cleaned only by the plunger. But, what if you don’t have a plunger and your toilet gets clogged? Well, the answer to how to unclog a toilet is provided in this article. You just make sure to go through all the relevant tools and things that we are going to discuss in this article.

From the tools and other options mentioned below, you can easily unclog your toilet without even using a plunger. Taking care of your toilet is as essential as anything to remove the unnecessary germs and viruses that later on bring new illnesses. You cannot leave your toilet to be clogged so here are the solutions for clog toilet. Don’t panic when there is no plunger in sight just use these 10 things and you are good to go. A clogged toilet will not be a problem anymore as you will get some easiest ways to get no clog toilet. So, let’s proceed ahead with the guide and learn all the different things you can use for cleaning purposes. 

What Other Things You Require to Unclog Toilet

The user needs to ensure some of the essential things like a wire hanger, baking soda, vinegar, and dish soap before achieving the goals. With these household items, you can easily carry out functions to unclog your toilet. If you are wondering how you can complete the tasks with such basic things then move ahead and know how to unclog a toilet. We all know that plunger is the easiest method that is highly used for that purpose but there are plenty of methods as well that will clear the clogging in a minimal time.

Methods to Unclog a Toilet Without a Plunger

You may now be curious to know about the secret items that will help you in unclogging the toilet. So, let’s move below and learn. 

Leave it Overnight

At times, all you require to do is to have some patience till the toilet starts to unclog itself. Your patience might resolve this issue easily. You can leave your toilet overnight. Clog gets pressure from the water in your toilet when it tries to leave. So, when you leave it over time, it becomes unclogged. If you find the clog there then make sure to prevent the water flow. It will help in flushing the toilet. 

Epsom Salt

 

Epsom Salt : how to flush a toilet without water

Epsom salt is the instant solution to clogged toilets. You must have it in your essential kit. Whenever you are at your friend’s toilet and face an agitated situation like this then make sure to use this secret ingredient. Epsom salt develops a quick reaction with the clogged and breaks them down into tiny particles. With this salt, you may save yourself from getting embarrassed in front of your family and friends. It is the most used trick that will be used by many to unclog the toilet. 

Bath Bombs

Bath Bombs : Kohler toilet

Bath bombs are another option that you use can use in this hard situation. They come in the shape of balls so you can easily carry them in your bags. You need to put bath bombs inside the clogged stuff and let it reacts further. It may coat the sides of the pipe to ease the path. Make sure to wait till bath bombs get completely dissolved. It would be recommended to always carry these small essential items with you whenever you go outside. As you also don’t want to feel embarrassed in front of anyone. You can reciprocate the situation with your smartness and these are just small ways that will define your personality. 

Baking Soda and Vinegar

Baking Soda and Vinegar : Plunger

Baking soda and vinegar are no better than a cool volcano when mixed. Their mixture can develop a quick cleanser for any kind of surface and floor. You can always count on them when there are no cleaning items left. Just make sure to carry the right amount of value. Like, you can carry around one cup of baking soda and pour it into the toilet. Do not split all of the baking soda into one specific place. Make sure to spread it around in a way that covers almost all areas. Now, just let it disappears and then add around two cups of vinegar. Do the same things with vinegar also, spread it all over until it gets dispersed. It would be better if you do it in a circular motion. Vinegar and baking soda altogether evolve a fizzy reaction that will help in breaking up the clog. Make sure that this mixture is sat for around an hour without any interruption. Now, when the time gets over, just flush the toilet. It will surely resolve the issue. However, if you will find no result then make sure to conduct the same process and leave it overnight. 

Wire Hanger

Wire Hanger : how to unclog a toilet without a plunger

A wire hanger is another item that you can use for unclogging the toilet. To use the hanger, you need to first unfold it in a way that it becomes straight. You don’t have to use the rough edge of it. Make sure to tie a rag to do a proper cleaning. With this rag, you have to continue the process of unclogging the toilet. Many times, using harsh edges prove to be more hectic and dangerous as it leads to more damage than you think. So, make sure to always put a rag whenever you use a rough material. The rag will help you from causing holes in the drainage pipe. 

Plain Hot Water

Plain Hot Water : how to unclog a toilet

Before starting with this, we want you to get a proper difference between plain hot water and boiling water. Plain hot water should not be at the boiling stage. If you mistakenly use boiling water then it would leave some cracks on your toilet seats. There are many types of toilet seats that are available in the market, you should know what kind of toilet seat you need. This, makes you dive into the worst situation. Always be cautious about what temperature you are using as everything in excess is bad and using boiling water for unclogging the toilet is worse. Now, you should pour the water from the waist level. The water pressure will dislodge all the causes that bring clogging to your bathroom. 

Drain Cleaners

Drain Cleaners 

Well, drain cleaners are not our choice, but if you don’t have anything that we have described above then make sure to use this chemical. The reason why we do not want to include them is they are not environmentally friendly. Also, they could cause damage or burns to your toilet. If you don’t want to use them then try to blend powdered dish soap with bleach and use this mixture. You can take around a cup of powdered dish soap and two cups of bleach to witness the unclogged toilet. Make sure to not flush the toilet for about half an hour. It needs some time to get a reaction.

Toilet Brush

Toilet Brush

If you don’t have any of these items then get ready to sacrifice your toilet brush. You can use it by moving back and forth. Make sure to do this gently. If you apply vigorous force then you might end up with a new problem. So, take this advice and do this process gently. Also, put on some essential items like goggles and rubber gloves before carrying out this task. You can throw this brush in the dustbin when the activities become finished. Ensure to purchase the new brush as you are not left with any choice. 

Plastic Bottle

use Plastic Bottle to unclog a toilet

This is the tricky one that you can try to unclog the toilet. Here is a quick description of what you can do to create water pressure from a bottle. First of all, make sure that you remove unnecessary water from the toilet bowl. You can use a small container to bring out the water. Once done with that, use another plastic container like a bottle and fill it with warm water. Make sure that you have put your thumb or any finger at the head of the bottle. You need to do it to hold the air pressure. Now, just place the bottle upside down at the bottom of your toilet and remove your thumb or fingers. Press the bottle that will leave the water with pressure and then clear all the clogged material.  

Prevent Clogs of Future

Toilets can only excrete toilet paper and human waste. So, don’t throw any of the pieces or objects that would harm them in the future. Here are the pointers that you consider for the prevention of clogs. 

  • Make sure that you will not flush excessive amounts of toilet paper. 
  • Try to flush multiple times if there are too many toilet papers. 
  • Ensure to flush products relevant only for toiler purposes. 
  • Your children should be learned to flush significant products other than toys and plastic items. 

Read Also: Best Smart Toilets- Top 10 Automatic Toilets Review Guide

Wind Up!

These items will help you in unclogging the toilet. We hope that you like this article and find it informative about how to unclog a toilet. In the future, if you find a clogged toilet then use these 10 tricks and get rid of the situation. If, by any chance, the situation becomes worsens then don’t forget to call a plumber. They will reduce the future’s possibilities also. Make sure to prevent these clogs by taking these three points into consideration. You will not fall into this kind of trouble again when you apply and teach these three things to yourself and your children. 

FAQs

How to unclog a toilet with poop in it?

Use a plunger for it. Hold the plunger with both of your hands. pump it up and down. Part of the poop definitely got stuck in your plunger and then carefully threw it in the garbage.

How unclog toilet with salt?

You can use salt to unclog the clogged toilet. You must use soda with salt for better results.

What can you pour down a toilet to unclog it?

You can use baking soda and vinegar together to unclog the toilet seat. As it starts reacting and results in bubble formation through which you can remove tough stains.

Filed Under: Guide

How to Remove a Toilet On Your Own [Step-by-Step]

September 8, 2021 by devid

Removing a toilet can seem a bit difficult job to most people. But, it is not. Most people can manage to remove the toilet on their own without any professional help. All you have to do is to make sure to follow this tutorial properly and you will be good to go. Check out this guide to know how to remove a toilet.

Always keep in mind that if there is a ceramic toilet, it can be heavy. So, avoid lifting it on your back, it can lead to injuries. Make sure to lift it on the legs. Moreover, if available, you can take help from somebody else.

Requirements

Before you proceed with the process, check out what you need.

Tools:

  • sponges
  • Screwdrivers
  • Lids and paint buckets
  • Wire brushes
  • Air ratchet wrenches
  • Wrenches

Material:

  • Cleaning rags
  • Two-piece toilet

Steps to Follow in How to Remove Toilet

Here are some steps which guide you on how to remove a toilet-

Step 1: Disconnecting Toilet Connector

mature tubes: Disconnecting water

The very first thing that you will have to do is to drain the water completely from the toilet. No matter if you are removing the toilet, or replacing it, you need to first drain the water. For this, follow the steps mentioned below.

  • To start with, you will have to disable the power supply at your shut-off valve. Usually, it is present on the wall at the back of the toilet, but, it can also be present on the floor.
  • Next, you will have to flush the toilet multiple times to drain the water completely. The flushing toilet should be beautifully designed to look fine for your guests.
  • Now, you may have to use the sponge to dry it completely and remove the remaining water.
  • After this, simply disconnect the connection tube. You will also have to make sure to keep a towel or a bucket near you so that you can collect the water standing in the drain.
  • When you are done with this, you will have to simply disconnect the connector at the tank also.

Step 2: Removing the Tank

replace toilet: remove the tank

Now, if you use a two-piece toilet, you must remove the toilet tank separately. Otherwise, for the one-piece toilet, you can skip this step and move to remove the toilet bowl. For this, follow the steps mentioned below.

  • First, you need to know that tank is attached using mounting bolts. You can find the mounting bolts placed on the sides and the middle sometimes.
  • You will then have to use a basin wrench or the ratchet wrench to loosen the nuts and remove them.
  • Next, you will have to lift the toilet tank and remove it. Make sure to place it in a location where it will be safe and out of your way.

Step 3: Remove the Toilet From the Floor

remove toilet: unbolt toilet

Now, the next step to removing the toilet is to unbolt it from the floor. For this, follow the steps mentioned below.

  • To start with, if you feel necessary, you will have to pry off the caps with the help of a screwdriver.
  • Now, you will have to use an adjustable wrench and remove the nuts. There are chances that you will be able to remove the screw using your hands.
  • Next, if you see that the screws are jammed completely, you can use penetrating oil and spray it to loosen the nuts.
  • In case the penetrating oil does not help, you will have to make sure that you use a hacksaw and cut bolts. You can also split them with the help of a nut splitter.

Step 4: Breaking the Toilet Seal

break the seal and remove the toilet

Now, the next step to removing the toilet is to break the seal. The toilet wax ring will seal the toilet flange and the toilet bowl’s bottom to the floor. So, if you wish to remove a toilet, you will have to break the seal. For this, follow the steps mentioned below.

  • Bestride the toilet and then try breaking the seal gently.
  • You will then have to raise the toilet bowl and safely place it on the towel so it won’t come in the wait. You may not be able to carry out this alone, so, you will need a partner.

Step 5: Pull Out the Wax Ring

remove wax from the floor

You will now have to pull the old wax ring. Follow the below-mentioned steps to do this.

  • First, you need to get a scrapper. You will have to use a scraper and try to pull out the wax from the flange and also, the bottom.
  • Next, throw the wax that you have pulled out and make sure to throw it properly so that it does not stick anywhere else.
  • The next thing that you need to do is to cleanse the flange.
  • Also, if you want to check the toilet flange, you can do it at this moment. If it needs to be replaced, you can replace the toilet flange now.

Step 6: Enclose the Hole

This is the last step in how to remove toilet process. Now that you have removed the toilet, you need to enclose the hole and then dispose of the new one. For this, follow the steps mentioned below.

  • You will have to stuff a cloth or a rag in the hole. This is a must so that the sewer gas does not seep into your house.
  • Next, you can use a bucket to enclose the rag and the flange.

To dispose of the old toilet, you will get two different options:

  • The first thing that you can do is to call the local trash services in your area and then ask them to pick up the old toilet. You can also visit their website to connect with them. In this case, you will have to dispose of the non-ceramic part individually.
  • Next, you can also visit the landfill and dispose of the toilet.
  • Other than this, you can also call the local recycling centers and check if they can take the non-ceramic parts. For this, you can also seek help from the water authority of your area so that they could suggest something.
  • Moreover, you can also contact the charity in your area which will accept and reuse the building materials donated to. But, make sure to donate only if it is in working condition. If they accept they may be able to arrange the transportation also.

You may check also: Most Powerful Flushing Toilet For Clean and Fresh Bathroom

Winding Up

So, we hope that by the end of the post, you have learned to how to a remove toilet. Now, you can also install a toilet if you want or can make the required changes in the bathroom if you wish. In case you are still not able to learn the process, we will advise you to contact a professional. Stay tuned to us for more such posts.

FAQs

How to remove a toilet seat?

You can easily remove a toilet seat. What you all need to do is first unscrew the bolts. If it is badly rusted and tight then you must use lubricant and then try to unscrew it.

How to remove rust from a toilet bowl?

Try a homemade cleaning solution to remove rust from the toilet seat. Do not use bleach as it can make it worse.

How much does it cost to remove a toilet?

Removing toilet seat cost depends on what type of toilet you are using. Also, what plumber you are calling for it?

Filed Under: Guide

How to Fix a Running Toilet-Best 3 Methods

September 6, 2021 by devid

How to fix a running toilet? Running a toilet is one of the issues that you need to fix as soon as possible. People usually do not know how to resolve this issue and may get stuck in the issue. But, fortunately, fixing the running toilet is easier than you imagine. There are straightforward methods that you can use to fix the toilet keeps running issues. If you are also facing a running toilet issue, check out this post. Here are some quick fixes to resolve the issue.

how to fix a running toilet

Reasons that You Face Toilet Keeps Running Issue

  • You may have to adjust the height of the float.
  • There may be some issue with the flapper and you have to replace it.
  • There is a need to shorten the length of the refill tube.

Tools Required

  • Replacement Fill Valve.
  • Cutting pliers. Rubber gloves.
  • Toilet replacement parts.
  • Multi-bit screwdriver.

How to Fix a Running Toilet

Here are some methods which help you get rid of runny toilets-

Method 1: Address the Problems with Flapper

One of the common reasons for facing a running toilet situation is issues with your flapper. It is a rubber seal that prevents the water from draining and stays in the bucket only. Whenever you flush the toilet, the chain present will pull up the water and the freshwater will fill up the bowl. To address and resolve the flapper issues, follow the steps mentioned below.

how to fix a running toilet: Testing the flapper

  • The very first thing that you need to do is to turn off the water supply to the toilet.
  • After this, you will have to use a towel and lay it out of your way. You can also place it in the corner. You will now have to hold any end of the lid of the toilet and pull the lid off.
  • Next, you will have to place the lid on the towel that you have led. They can be broken easily so make sure to keep them in a safer place.
  • Now, you will have to check the chain which pulls up the flapper. You may face the issue if the chain is short or long than needed.
  • In case you notice that the tension is high on that chain, you will have to detach the hook and attach it at least two links above. It will help to loosen the chain and then you need to attach the hook and the lever.
  • Other than this, if the chain is long, you will have to trim the chain to make it an appropriate size. After this, you will have to attach the hook to the flush lever again.
  • Now, the next thing that you will have to do is to check the flapper. For this, you need to detach the flapper. Check if the open tube is present in the center. You will now have to check the flapper if there is any disintegration, discoloration, or mineral deposits.
  • In case there is a mineral deposit, you will have to make sure to clean it. To do this, you can use vinegar. You will have to soak the flapper in vinegar for 30 minutes and then use a toothbrush to clean up all the dirt and buildup.
  • When this is done, you will have to place the flapper back and attach all the pins.
  • Now, you need to run the water again and listen to the sound. You can then check if the issue is resolved or not.
  • Other than this, if you see that the flapper fails to seal properly even after cleaning, you need to buy a new one. Make sure to buy the same style of the flapper and fit it into the toilet.
  • For this, you need to place it properly and then fit all the nuts.
  • Now, turn on the water and then make sure that the issue is resolved.

Method 2: Checking the Fill Valve

In case you are not able to fix the running toilet issue by changing the flapper, there is a high chance that the issue is with the fill valve. You will then have to check if there is any leak and then place a new one. The process is further divided. You need to follow the steps in the same sequence to avoid errors.

Checking the Fill Valve

how to fix running toilet: check the fill valve

  • To check the fill valve, you will have to flush your toilet and check if there is any leak.
  • Next, you will have to lift the toilet float to check if there is any stoppage of water,
  • You may have to adjust the float arm to prevent the tank from filling. Go it when the water level in the tank is just 1 inch below your overflowed pipe.
  • Next, if you still notice the leak, you may have to replace the fill valve.

Replacing the Fill Valve

Replacing the Fill Valve Image

  • For this, you need to disable the water supply temporarily. Now, you need to flush the whole water and use a sponge to remove the remaining in the tank.
  • When done, you will have to disconnect the supply line of water and then loosen the fill valve locknut. You will now have to lift and remove the old fill valve.

Installing New Fill Valve

  • Now, you will have to place the new fill valve in the correct location. For this, you can also use the manual. Tighten all the nuts.
  • Next, you need to adjust the fill valve according to the height. In case you notice that the fill valve is placed at the maximum height, still, the overflow pipe is upper than the critical mark, you will have to use a hacksaw and shorten it. It should be at least 1 inch below the critical mark.

Connecting Fill Tube

Connecting Fill Tube Image

  • To start with, you will have to take one end of the newly installed fill tube and then attach it to the fill valve nipple. You will then have to attach the other end to the angle adapter.
  • Next, you will have to clip the adapter to the overflow pipe
  • When done, you will have to attach the flapper to the lever and then turn on the water. Check if the issue is resolved or not.

Method 3: Adjust the Water Level

Another reason for which you can face the running toilet issue is the water level. If the water level is high, the water will keep draining into the tube. So, to fix this issue, you need to adjust the water level. For this, follow the steps mentioned below.

Checking the Level of Water

  • The first thing that you have to do is to check the overflow tube. In case you are not aware of what it is, it is a tube present in the center of the tank. It will connect the toilet bowl and tank.
  • Next, you will have to check if the water is draining into the tube. In case it happens, you need to adjust the level of water by moving the float lower.

Check the Kind of Float Present

  • You are going to get two types of float presents. One is a float ball fill valve and the other is a float cup fill valve.
  • If you notice a ball-shaped float at the end of the arm attached to the fill valve, it means that you are dealing with the float ball fill valve. In this case, you need to check the ball. If there is water inside it, you will have to replace it.
  • Other than this, if there is a small cylinder around the fill valve, it means there is a float cup fill valve present. The cup moves up and down on the shaft and with its height, you can determine the water level.

Adjust Float Ball Fill Valve

Adjust Float Ball Fill Valve Image

  • Now, if you have the float ball fill valve, you will have to look for the screw with which the float arm is attached to the fill valve. By turning this screw, you will be able to adjust the height, you can use comfortable height toilets for your own comfort.
  • You will have to flush and then again fill the tank. You will now have to check the water level.
  • Now, you need to make sure that the water level is 1.5 inches below your overflow tube. If it is not, you will have to keep moving the screw to adjust the level of water.

Adjust Float Cup Fill Valve

Adjust Float Cup Fill Valve Image

  • For the Float cup fill valve, you will have to adjust the water level in the same way. look for the adjustment screw; to adjust the water level, you will have to turn the water level.
  • Next, you will have to flush and fill the tank again.
  • You will now have to check the water level.
  • Now, you need to make sure that the water level is 1.5 inches below your overflow tube. If it is not, you will have to keep moving the screw to adjust the level of water.

Verify the Fill Tube

Now, the last step in the process to fix the running toilet is to check if there is an issue with the fill tube. It is the tube that attaches to the fill valve and fills the water tank after you have flushed it. Make sure that this tube is above the waterline. If not, the running toilet issue can occur. So, when you will fill the water tank, you will have to check that the tube must not in the water. If it is under the waterline, you will have to trim the tube enough so that the tube is above.

You may also read- Most Powerful Flushing Toilet For Clean and Fresh Bathroom

To Wind Up

All the methods mentioned above are doable and you will be able to resolve the toilet that keeps running issue easily. If you still get stuck at any point, we will suggest you call a plumber.

FAQs

How to fix a running toilet without a ball float?

First, replace the fill valve only if the tank is overflowing. If this doesn’t work out then try to replace the toilet flapper.

Why does my toilet float keep running?

This can happen because of various reasons and the most common one is that you may have a damaged float which is why it can’t stop the water flow leading the tank to overflow.

Cost to fix a running toilet?

The average cost can range between 60 to 200 dollars. It depends on what type of problem you are facing.

Filed Under: Guide

  • « Go to Previous Page
  • Go to page 1
  • Interim pages omitted …
  • Go to page 13
  • Go to page 14
  • Go to page 15

Footer

Recent Posts

  • Toilet Auger: How To Use a Toilet Auger? Everything You Need To Know
  • Can You Use Drano in a Toilet? Here’s Everything You Need To Know
  • How to Turn Off Water to Toilet? All Possible Solutions | Simple Tricks
  • How to Use A Bidet? Hygiene & Etiquettes Rules | Tips You Should Never Forget!
  • Best Toto Toilet To Buy | Complete Guide (Latest Features)

Quick Links

About Us
Contact Us

Disclaimer

Copyright © 2022 – All Rights Reserved. Contact Us. Here we just give you an aide on the best way to get knowledge, it implies we are alluding to substance that are uninhibitedly accessible and overstep no regulation. All the Content is only for information purposes.