Many people enjoy soaking in a bubbling Jacuzzi tub, but few realize the importance of keeping it clean. Jacuzzis are essentially giant whirlpools, and over time they can become breeding grounds for bacteria. In addition, the warm water and constant movement make it difficult for soap and other cleaning products to break down grime and dirt. As a result, it’s important to clean a Jacuzzi tub deeply on a regular basis.
There are some special considerations when it comes to cleaning a jacuzzi tub. In this blog, we will share some tips on how to keep your jacuzzi tub sparkling clean. From what supplies you’ll need, to tips on getting rid of tough stains, we will cover all sections. So grab your swimsuit and let’s get started!
How to Clean a Jacuzzi Tub in 7 Steps
Read the Owner’s Manual
Before you start cleaning your Jacuzzi tub, it’s important to read the owner’s manual. Every model is different and you need to know what products and methods are safe to use on your particular tub. Once you’ve read the manual, make sure you have all the supplies you need so you can properly clean your jacuzzi tub.
Step One: Remove any toys or objects from the tub. This includes rubber bath mats, loofahs, and washcloths. All of these things can harbor bacteria, so it’s important to remove them before you start cleaning.
Step Two: Fill the tub with hot water. The water doesn’t need to be boiling hot, but it should be as hot as you can stand it. Add a squirt of dish soap and swirl it around with your hand to create suds.
Step Three: Turn on the jets and let them run for five minutes. This will help loosen any dirt or soap scum that might be clinging to the sides of the tub.
Step Four: Use a sponge or soft cloth to wipe down the inside of the tub, being sure to pay special attention to areas where there might be stubborn dirt or grime buildup. Rinse the sponge or cloth frequently in the hot water to avoid re-depositing dirt back onto the tub.
Step Five: Once you have given the entire tub a good scrubbing, turn off the jets and let all the dirty water drain out.
Step Six: Finally, rinse the tub one more time with clean water to remove any remaining soap residue. And that’s it! Your Jacuzzi tub is now sparkling clean and ready for you to enjoy.
Step Seven: Once you’ve finished cleaning your Jacuzzi tub, it’s important to dry everything off completely before using it again. This will help prevent any mold or mildew from forming in or around your tub.
How to Clean a Jacuzzi Tub | DIY Remedies
There are some easy DIY remedies that you can use to clean a Jacuzzi tub quickly and easily. So grab your gloves and let’s get started!
1. Soap and Water
This is the simplest and gentlest way to clean your Jacuzzi tub. Fill the tub about halfway with warm water, then add a squirt of dish soap. Use a washcloth or soft sponge to scrub the tub’s surface, paying special attention to any areas that look particularly dirty. When you’re finished scrubbing, empty the tub and give it a final rinse with clean water.
2. Baking Soda and Water Solution
Another effective way to clean your Jacuzzi tub is to use a baking soda and water solution. This solution is perfect for removing tough stains from the surface of your Jacuzzi tub. To make this solution, mix 1/2 cup of baking soda with 1/4 cup of water in a bowl. Then, use a sponge or brush to apply the mixture to the stained areas of your Jacuzzi tub. For best results, let the mixture sit on the surface for 5 minutes before wiping it away with a clean cloth.
3. Use Lemons or Oranges
The citric acid in citrus fruits is great for breaking down dirt, grime, and soap scum. Fill your tub with hot water and add the juice of 2 oranges. Let it sit for 20 minutes before draining the tub and rinsing it out with clean water.
Similarly, you can use lemon juice and water solution. This solution will help to disinfect your tub while also removing any dirt or grime. To make the solution, mix ¼ cup of lemon juice with 1 gallon of water. Then, apply the solution to the surface of your tub using a sponge or cloth. Let the solution sit for several minutes before rinsing away with warm water. You may need to scrub these areas with a soft brush before rinsing if you have hard water stains.
4. Commercial Bathroom Cleaner
As a last resort, you can always use a commercial bathroom cleaner. Be sure to choose one that is specifically designed for cleaning baths and showers; these cleaners typically contain strong chemicals that can break down built-up dirt and grime quickly and easily. Apply the cleaner according to the manufacturer’s instructions; usually, this involves spraying it directly on the surface of the tub and letting it sit for several minutes before scrubbing it with a sponge or washcloth. Rinse away all traces of cleaner when finished.
Maintaining Your Jacuzzi for Optimal Use
A Jacuzzi can be a great addition to any home—but only if it’s well-maintained. Neglecting your Jacuzzi can lead to all sorts of problems, from leaks to breakdowns. Here are some tips on how to keep your Jacuzzi in tip-top shape. By following these simple maintenance tips, you can enjoy your Jacuzzi for years to come.
Tip #1: Check the pH Level of the Water Regularly
The pH level of the water in your Jacuzzi should be between 7.2 and 7.6. If it’s outside of that range, it can cause skin irritation or damage the internal components of the Jacuzzi. You can test the pH level of the water with a simple test kit that you can purchase at your local hardware store.
Tip #2: Clean the Filters Regularly
Jacuzzis have filters that trap dirt, debris, and other contaminants. These filters need to be cleaned on a regular basis—typically once every two weeks—in order to prevent clogging and ensure optimal Jacuzzi performance. You can clean your filters by removing them and soaking them in a solution of water and filter Cleanse (available at most pool supply stores).
Tip #3: Inspect the Jets Regularly for Cracks or Other Damage
It’s important to inspect the jets regularly for any cracks or other damage. If you see any damage, it’s important to have it repaired as soon as possible as damaged jets can cause water leakage.
Some Last Words
It is important to clean your jacuzzi tub regularly in order to keep it functioning properly and looking new. By following the simple steps we outlined in this post, you can easily clean your jacuzzi tub and maintain its beauty for years to come. Thanks for reading our guide on how to clean a Jacuzzi tub- we hope you find it helpful!
Q1. Can I use vinegar to clean my Jacuzzi tub?
We don’t recommend it! Vinegar is an acidic cleaning agent which can damage the surface of your tub. It’s also harsh on your skin and lungs, so it’s not the best option if you plan on soaking in your Jacuzzi tub. Instead, we recommend using a mild, non-abrasive cleaner like Simple Green or Seventh Generation.
Q2. How do I get the black stuff out of my Jacuzzi?
The black stuff is most likely mildew or mold and it can be tough to get rid of. We recommend using a tile and grout cleaner. For extra tough stains, you may need to use a stiff brush or toothbrush. Just be sure not to use anything too abrasive that could scratch the surface of your tub.
Q3. What can I use to clean my Jacuzzi tub jets?
The steps on how to clean jacuzzi tub jets are:
- First, start by turning off the power to your Jacuzzi tub at the breaker box.
- Then, remove any debris from the Jets with a soft cloth or toothbrush.
- Next, fill your tub with hot water and add a non-abrasive cleaner (about ¼ cup for every 100 gallons of water).
- Turn on the jets and let them run for 5 minutes before turning them off again.
- Finally, drain the water and refill the tub with clean water to rinse away any residual cleaner.