Toilet

Nothing can make your heart pound as much as an overflowing toilet does. So, if you are tired of unclogging your toilet with a plunger or with any other tough chemical. But still not able to unclog then you are most likely to run to a professional plumber which will cost you high. But what if we say you can save your money by using a toilet auger on your own? Yes, it is possible with our ultimate guide. However, we are coming up with a guide that will tell you how to use a toilet auger on your own. If you are ready to know more about it then go on to read further!

What is a Toilet Auger?

Toilet augers are a device used to clear cloggings and obstructions from the toilet drain. It is a kind of drain-clearing tool that is specifically designed with metal cable so that it can bore through the toilet drain and clear the clog. Generally, it is 3 to 6 feet long with a coiled hooked head and a rubber handle. This is also known as a drain snake. 

A Toilet auger is used when the toilet plunger stops working. However, if you are trying to unclog the drain with a toilet plunger and it is still not clearing and creating problems then a toilet auger is the way to go. So let’s look at the process of how to use an auger.

How To Use a Toilet Auger? 

We all want to handle our toilet problems on our own but sometimes it becomes difficult with tough cloggings. During those times, you will want to let it be handled by pros but what if you become one? Yes, the further section will deal with the question “how to use an auger”.

Step 1: Insert Auger In The Toilet

The first step that you will need to perform is inserting the auger in the toilet bowl. Before that, you must ensure that you have pulled the handle of the auger all the way up so that it can clean the clog properly as you don’t know the exact location of the clog.

Here’s a question: how much of the auger should be inserted? So the simple answer is you should not be able to see the end of the auger. What you can see are the tube and the sleeve.

Step  2: Cranking Up of Handle

Like every other drain snake, you will need to rotate the handle and let the auger get in the drain properly. Now, you can start cranking up the auger in one direction till it feeds last. Now switch to the other direction and start the process again. 

In most cases, the clog is somewhere in the C-shaped drain tube but sometimes it is very far where you need to put extra effort to unclog your toilet. Crank up the handle to the last extent and keep rotating so that the clog can flow away.

Step 3: Extract The Auger

When you finally reach the clogged part you will be able to feel some restrictions against the auger then you may put in some effort. After completing till the last extent you need to pull out the Auger. 

Pulling out the auger is as simple as inserting it. You just need to rotate the auger anticlockwise without much force. Slowly pulling it backward and rotating, when you start feeling some force against the tip of the auger it means it is time to pull out the entire auger of the bowl.   

Step 4: Flush The Drain

Now, when you are done with the process of snaking the drain it’s time to flush. Flushing at this moment would be the last step. Flush will flow away all the cloggings in the drain. 

If still, the problem of clogging persists in the bowl then you would need to do the whole process again till you make the drain clear. 

Safety Considerations

Toilets are at high risk of spreading bacteria and harmful germs. Working with them has proven to be dangerous. So first you need to be extra careful. Moreover, before you get into the process you must know all the precautionary measures so that you can perform it in a better way. This is why we have provided you with the list of instructions that you would need to keep in mind before you start the unclogging.

Wear Gloves

Any drain tool can take up bacteria and germs from the drain, and so does the toilet auger. Putting the safety measure at paramount, you are advised to wear rubber gloves while unclogging your toilet. This way you can protect yourself from bacteria.  

Put Minimal Force

The toilet bowl is very much vulnerable as it is made up of porcelain that is most likely to get scratched. To prevent scratching, you need to put very less force while snaking in the drain. If the snaking is done with high force then your toilet seat is most likely to get scratched. This way you can make the condition even worse. So, keep it in mind to use an auger with minimal force. 

Rinsing of Auger

Make sure when you are done using the toilet auger, rinse it with some cleaning chemicals. Rinsing auger can prevent the chance of spreading harmful bacteria and germs.  After using toilet auger is more prone to get bacteria on it which are likely to spread if not rinsed off properly.

Conclusion

Having a clogged toilet is such a frustrating thing as toilets are the place where you enjoy some quality “me” time. And disturbance in that is quite irritating. However, this guide has probably helped you out in making your toilet clog-free. So far, we have answered the most important question “how to use toilet auger”. We hope our guide has assisted you in every way possible. If you still have any queries then you may contact us in the comment section. Our experts are ready to assist you 24X7

Read, also- How to Snake a Toilet With The Uses of Drain Snake?

Frequently Asked Questions

Q1. How to use an auger to unclog a toilet?

Using an auger to unclog the toilet is quite an easy task. You can do it on your own. You just need to go through the following steps.

1. Put an auger in the toilet bowl.
2. Slowly rotate the handle of the auger till it stretches to the last extent.
3. After removing the clog, it is now time to take the auger out.
4. Rotate the handle in the opposite direction and take the auger out completely.
5. Flush the drain. Repeat the process again if needed.

Q2. When should I Replace my Toilet Auger?

A toilet auger can last for decades. If you use the toilet auger with proper care then it can give you a long lifespan. Be sure when your auger’s metal cable starts rusting or the rubber of the auger is damaged then it is time to change the auger. 

Q3. Can an Auger Damage a Toilet?

Yes, An auger can damage a toilet. Toilets are made up of very sensitive material called porcelain that can get scratched if the auger snakes in the toilet violently. So, make sure whenever you do unclog the toilet, you must not put extra force.

When it comes to unclogging the drain, the very first way anyone would consider is Drano. Because Drano is the most trusted and tested brand coming from ages in every household. But can you use Drano in a toilet? 

However, this guide will help you to understand everything about Drano from its pros and cons to the best alternative tactics that you can use for unclogging your toilet. If you want to know more then keep up with our blog.

What is Drano?

Since 1920, Drano has been floating in the market. Over the years, Drano has made a good market for itself. Drano is a tough chemical used for ages to clean clogged toilets and Drains. Basically, used for the clogs done by human waste. 

It’s based on sodium hydroxide, sodium nitrate, sodium chloride (salt), sodium hypochlorite (bleach), and aluminum. which causes a chemical reaction that further dissolves the clog and results in a clog-free toilet. However, it is formulated for sinks and kitchen drains but can also be used in toilet drains.

Can You Use Drano In a Toilet?

Can I use Drano in toilet? The answer to this is very simple, No. You should not use Drano in toilets as they can be very abrasive and harmful to your pipes and to the drainage system. When you pour Drano into your toilet seat. Sodium starts combining with aluminum shards which creates an oxidizing chemical. further, It starts heating up almost at the boiling temperature. That helps to clear the clog more efficiently. But when it starts getting harmful to your toilet? Read on to know more about it.

In the further section, we are going to talk about all the pros and cons that you must consider before you head toward the shop to buy another Drano bottle for your clogged toilet. So let’s get into it.

The Pros:

Easy to Use

You don’t need professionals or other special skills to clear your clog. You would just need to open the bottle and pour it directly into the drain. Unlike another method to unclog Drano is easy to use but has some downsides as well just read along to know. 

Inexpensive

Removing clogs with Drano is really very affordable. Suppose, If you call some professional plumber to clear the clog then it would definitely cost you high. Instead, if you buy a Dtrano that would hardly cost you 10 bucks which is very less than any other means. 

Works well in Sinks and Bathrooms

Drano is specifically made for kitchen sinks and bathroom drains. However, it works diligently if used in the clogs done by the hair, food waste, and greases. Sink drains and Kitchen drains are often clogged and Drano would be the best clog cleaner in these cases.

The Cons:

It Can’t Clear Every Type of Clog

What if Clog doesn’t get clear after the use of Drano in toilet? The most likely question that comes up in your mind while using. As we have mentioned above, Drano is only useful in human waste clogs. If you are using a toilet with solid waste clogs then it would be a little difficult to get rid of them. 

Not Appropriate for Toilet

Toilet drains and pipes are made up of porcelain which is very likely to get damaged if you use tough chemicals. More often toilet drains are clogged with solid waste that is hard to clear away. However, Chemicals are heavier than water so they sit down and don’t work well. 

Cause Chemical Burns

Drano is made up of Sodium and aluminum shards when it comes into the air reacts as a highly oxidizing chemical, heated up almost at a boiling temperature which can cause burning. If you don’t take precautionary measures for yourself then it can irritate your eyes and even if you touch the formed bubbles it can burn your skin as well. 

Can Damage Your Pipes

The chemical reaction that breaks up in the clog is highly reactive and it can damage your pipe fittings. It can soften the PVC pipes and if your drain is already corroded then it can get worse. 

Can Create More Clogs 

After every use Drano leaves some residue that builds up in grease and becomes harder to remove. So remember don’t use Drano frequently. 

Read, also- 6 Methods How to Plunge a Toilet With a Toilet Plunger

Warnings To Consider

Can you put Drano in a toilet? Drano is a really very dangerous chemical and it is advised to take some precautionary measures before you use it. We are listing below some of the most important warnings that you must consider.

1. Don’t use Drano if you have a septic system.
2. Cover yourself properly while using Drano.
3. Never pour the remaining specks of Drano from your Toilet into garbage bins.
4. If your Drain is completely blocked then you must not use any sort of chemical. It can make the situation worse.
5. Keep the bottle of the Drano away from your kids and pets.

Alternative of Drano

You are here, it means you have got a fair insight into Drano and the answer to the question “can I use Drano in the toilet“.  So, if you are dealing with a clogged toilet then you must look for alternative methods to clear that clogging. However, the further section is ready for you with substitutes that you can use in your toilets without even harming pipes and fittings.

Plunger

The plunger has always been an opener for drain cloggings. However, you can use a plunger that can help you to unclog the drain. Here’s how to do it.

1. Insert the plunger into the drain. 
2. Now you need to put extra force and pressure to get a better result. 
3. Pull the plunger up and down till the clog gets cleared.
4. Flush away.

Toilet Auger

Toilet Auger is a way out when you have very rough and hard clogs. However, using a toilet auger is not that easy because you need to consider some warnings. If snaking is not done in the right way then it can cause further damage. Here we are providing steps below that you can follow. 

1. Insert the auger in the bowl and start cranking up the handle till you reach the last extent.
2. Now, rotate the auger in different directions to get the clogging clear away.
3. Take out the tool completely out of the pool. Then, flush away.

Baking Soda And Vinegar

The most traditional and contemporary method. Baking soda along with vinegar is the ultimate solution for clearing the clogs. As it is a non-toxic and natural cleaner but incredible at removing hard clogs. Here is how you can do it.

1. Pour one cup of baking soda into the bowl.
2. After waiting 5 to 10 minutes, You need to pour 2 cups of vinegar into it.
3. Close the lid of the toilet and leave for an hour approx.
4. Then, Flush down the dirt.

Bleach

Bleaching is another solution that you may consider if any of the methods is not working. Bleaching is one of the oldest methods that has been used in households. Try bleaching if it doesn’t work out then you might have a serious problem. And you may consider the need for professionals. 

1. Take 2 to 3 cups of natural bleach
2. After a couple of minutes add one cup of powdered soap.
3. Leave it for at least 20 minutes and flush away the dirt.

You may also like- How to Unclog a Toilet Without a Plunger- 10 Quick Ways

Conclusion

Clogging the toilet is a headache, it is even worse when you have guests at your place. However, we have provided you with a full-fledged guide on Drano. Drano is abrasive to your toilet and drain fitting this is why you may consider other alternatives. Hoping you have got the answer to the question “Can You Use a Drano In a Toilet?” If you are still facing any queries, you may get back to us. Our team of experts is ready to assist you in every way possible.

Frequently Asked Questions

Q1. What to do if you put Drano in the toilet?

If you have put Drano in the toilet then don’t worry you can still treat your toilet well. You can use Drano Max to avoid further damage. It is a kind of preventive measure that can save your toilet.

Q2. Why can’t you use Drano in a toilet?

Drano is a highly reactive chemical that can cause damage to your PVC fittings and the S-shaped drain as well. If your drains are already corroding then it can make the situation worse. 

Q3. How to use Drano max gel in the toilet?

Using Drano Max Gel is very easy. You can use it as a preventive measure and prevent your toilet from further damage. Check the steps below to get a better insight.

1. Put the Drano Max in your toilet and leave it for at least 6 to 8 hours.
2. Flush away all the dirt with lukewarm water. 

If there is a problem with your toilet, your first step should be to shut off the water supply. If you don’t know how to turn off water to toilet, or if your toilet doesn’t have a shut-off valve system, this situation becomes a bit intimidating for you. Luckily, you’ve been fully guided here with easy ways to come out of this problem, whether it’s turning off the toilet’s valve, turning off the main water supply line, or adjusting the float lever. 

This small task remains pending if the plumber is not called on time, so you can try to fix it without turning off the water in the entire house with the advice of our experts. If the problem is too big then the plumber should be called. 

4 Easiest Methods on How to Turn Off Water to Toilet

We have added all the solutions here with which you can know how to stop the water. We know that there are different types of systems to stop the water supply in every house, so we have tried our best to understand you accordingly.

1. How to Turn Water Off to Toilet by Turning Off the Toilet Valve

You can turn off water to toilet by shutting off the valve. You will see a rear wall near the toilet of your bathroom and there will be a valve on the left-hand side which you will have to shut off. It will be off when you turn it clockwise. 

It is not necessary that in every toilet it turns off or on just by turning the valve. In some toilets, the push and pull system for this valve is adjusted. To turn off the water in this situation, first, you have to hold the handle of the valve and then pull it outside. 

What to Do If the Valve is Stuck 

Generally, the toilet valve is rarely used to shut off water, due to which it becomes difficult to turn the valve. By the way, such a problem is made with those valves which are not made of stainless steel, although it is rarely seen. Valves that are not made of this material are prone to corrode/rust.

If such a situation arises, then you should spray penetrating oil e.g. WD-40 on the valve and then keep it like this for 10 to 15 minutes. Then, you can again try to turn off this valve.

If you do not want to waste so much time closing the valve, then you need to turn off the main water supply valve.

2. Using Main Water Supply Valve 

If for any reason your toilet has no water valve mechanisms or it is there but not working instantly then you need to turn off the water by shutting off the main valve. By turning the main valve off, the water fixtures of your house will also not supply the water.

The location of the main shut off valve varies from house to house. 

Location 1:-  If you know where your water meter is, you can easily find the turn off valve. Mostly the location of the valve is made close to the location of your water meter.

Below we have mentioned two types of main valves because any one of them would be installed in your house. 

• Lever Valve- You need to turn off this by moving it perpendicularly (90 degrees). 
• Red Wheel Valve- Turn it clockwise to turn this valve off

Location 2:-  People who have private wells in their houses will get this main value near the pressure tank.

Location 3:-  In some houses, the turn off main value will be attached in the basement or sometimes in the utility areas like the laundry room. 

Note:- As we do not get into the trouble of turning off or on the main valve regularly, so this valve can also be stuck. The solution to this problem is you have to pour WD-40 penetrating oil on it so that the rust will be removed. You have to wait at least 15 minutes before turning off the valve again.

3. How to Turn Off Water to Toilet by Adjusting the Toilet Float 

If your toilet system also has a float cylinder/cup or ball float, you can use this solution to shut off the water supply as well.  

How Toilet Float Works?

The float is attached to the valve of the toilet so that it can limit the amount of water entering the toilet after each flush. After every flush, the float turns towards the bottom of the toilet tank, then the fill valve opens and a limited amount of water enters. 

As the water fills the tank the float again slowly moves upwards.

The float automatically reaches the top of the tank when the tank is completely full and after that, no water flows into the tank.  

Read, also- 6 Best Troubleshoots for Toilet Leaking At Base| Fix Water Supply Line | All Working Solutions

How To Turn off the Water to Toilet?

Now what you have to do here is to maintain the float at the top of the tank so that water does not enter the tank again. For this, you have to take a hard piece of anything and slide it into the bottom of the toilet float. Now even after flushing, the toilet valve will remain closed and even a little water will not enter the toilet tank again. This is a good temporary method to stop excessive water flow until you can find a good plumber.

4. Disconnect the Toilet Water Supply Line 

Even after turning the valve off, if water continues to flow in your tank, then there is definitely a problem of leaking in the valve. If you want water to reach your entire house except for the toilet, then first of all you have to shut off the water supply line of your toilet. After this, it has to be plugged off with the help of a plastic bag and tape.

Note- Plugg water supply line off from the lower side of the toilet tank. If you want to avoid damaging the coupling, then firstly always try to lose it with your hands and then use a wrench.  

When the water supply line is off, you should cover it speedily with a plastic bag and duct tape to tape it. Some water may still be in your toilet tank, so you have to use a bucket to drain it. 

How to Turn Off Water to Toilet? [Answered] 

If your toilet is overflowing and you are worried about “How to Turn Off Toilet Water, then you should not delay repairing it as soon as possible. To turn the water supply off to your toilet, find the toilet valve from the left side of the toilet which is close to the floor and attached to the rear wall. 

You have to turn this valve clockwise and then hear the sound to know whether water is still coming into the water tank.  

If your valve can be pushed or pulled only, you will need to push it inward. If this valve is rusty and unable to work because it has not been turned off or on for a long time, then you can fix this problem by pouring VD-40 oil on it.

Simplest Ways to Drain Toilet After Turning Off Water 

If your toilet is clogged and overflowing then you need to take action immediately. For that, first, you need to cut off the water supply to the toilet and drain out the toilet.

It is not as difficult as it seems to be, the water in the toilet tank is clean water. You can empty the toilet tank with the help of a mug or cup and scoop out the water from the toilet tank. You can also use a hose pipe to empty the tank.

After using the hose pipe, there may be some amount of water left in the tank. You can soak it out with the help of a sponge. Wipe out the remaining water with a sponge and squeeze it out in the bucket.

You need to be creative to drain your toilet. For the same, take a pipe 2-3 feet long and make a U-shape with it. Fill this pipe with water and close both ends with your thumbs. Put one end of the pipe into the tank and the other end into the bucket in which the water needs to be collected. 

Also, like- How to Adjust the Water Level in the Toilet Bowl? Easiest DIYs

Conclusion 

Flowing unnecessary water in the toilet is not only bad for the environment, but it also increases the cost of both your water bills.  In your own place, you can easily turn off water to toilet by yourself by getting information online unless there is a problem with your turn off valve. If you keep waiting for the plumber to come to turn it off, this results in extensive and costly water damage if the toilet has a large leak. If you still have any doubts coming out of “how to turn toilet water off ” then you can get to us and we will try to assist you in the best way possible.

Frequently Asked Questions  

Q.1- Is it OK to turn off the water to a toilet?

Whenever any problem is found in your toilet, the first thing to do is to stop the flow of water. If you do not do this, then your bathroom will not remain clean due to the flow of water and the water will also get wasted. There are many ways to stop the water from the toilet, which we have mentioned above on this page.

Q.2- Why can’t I shut off the water to my toilet?

As time passes, water starts leaking from the toilet tank inside the toilet bowl. This issue raises the cost of water. This problem is created due to the following reasons.

• Any fault occurs in your toilet fill valve. 
• The level of water in the tank reaches or above the highest point of the overflow pipe. 
• The flapper ball that works for closing the outlet from the lower side of the toilet tank is not working properly.

Q.3- How do you turn off the water to the toilet without a valve?

To turn off the water toilet without the valve, you need to follow these steps:-

1. First, find the shutoff valve, there is not a certain position of the shut-off valve so you need to find it by looking all around the toilet.
2. If the shut-off valve is not working then you may have to cut off the main water supply of the house. It may be located outside of the house or in the basement based on your hose design.
3. Find a way to keep the floating lever in an upward horizontal position in the toilet tank to block the entrance of the water supply in the tank.

The bathroom Bidet is such an interesting system that people are always curious to know how to use a bidet. If you’re also getting a chance to go to Latin America, Europe, East Asia, or the Middle East soon, then surely you will see this bidet attachment close to the toilet. A large number of bidets are prevalent in all these places and people there have a habit of sitting on them whenever they use the toilet.

But today all your doubts on these topics like “What is Bidet”, “How to Use a Bidet”, “Are Bidets Hygienic”, Is a Bidet for a Man or a Woman” and many others are going to end as we have added all the information from very basic so that even beginners do not have any difficulty in understanding everything.

What is the Main Purpose of a Bidet? 

How to Use A Bidet: Before using the bidet, use the toilet. The bidet helps in cleaning when people have used the toilet. Either you can use the bidet itself or use the bidet to combine toilet paper. Some people think that the bidet is a cleaner alternative to toilet paper. So, they use only one of these two, while some people use both.

Find the Bathroom Bidet 

At times, the bidet is arranged close to the toilet and connected to the wall. Its structure is similar to the low sink with a faucet. Nowadays most modern bidets are manufactured into the seat of the toilet. It means you are free from getting up to straddle other fixtures. 

Below we have mentioned about three types of bidets:

• Standalone Bidet
• Handheld Bidet
• Add on Bidets

What is a Standalone Bidet

This is the original bidet design and is available in Europe. This is a separate installation that is generally found close to the toilet. Although, sometimes they are located across the room/ office or down the hallway. 

Whenever you will use a standalone bidet, you must stand up and move over to the bidet. This was launched in the 18th century in Europe. 

What is the Purpose of Handheld Bidets 

It is used in households. It is hung on the wall with the help of a tool.  To reach the required position, this bidet must be manually moved. 

About Add-on Bidets or Side Toilet Rim 

As bathrooms in America and Asia lack the space for separate fixtures, a lot of toilets are equipped with fixtures or built-in bidets that place over the side rim or seat. Like this, there is no need to get up to be cleaned. 

How Do You Use a Bidet Standalone 

When using most standalone bidets, you can face away from the water controls. As you would, when using a toilet, or facing them. By doing the second method, it becomes very simple by controlling the flow of both water and temperature easily. As you can see the water speed and accordingly you will not have any problem in cleaning.

• If you are wearing trousers/pants you will need to take them off to sit facing the controls on the bathroom bidet. 
• People who do not want to completely remove their pants. Just take one leg out of the pants so that you don’t get trouble moving your legs around the bidet. 
• There is no problem with removing the paint in the Add Bidet, so it is more simple.
• Ultimately in a standalone bidet toilet, the method you face may be determined by the part of your body you think to clean and the position of the jets. Like if you want to clean your front part, face the jets and it might be simpler. If you need to clean your rear, face away from the jets. 

How Do You Activate A Bidet? 

Either you will get to see the WASH button on the toilet itself or it will be visible on the remote control of the bidet, which is mostly given on the wall near the toilet. You will also see a nozzle that will be below you so that you can comfortably wash your lower body with a stream of water.

• When you have cleaned thoroughly, you need to press the STOP button. Then the nozzle will automatically rise itself and go back in the seat again.
• In add-on bidets, you have to either simply turn the direction of the Lever or pull a String and rotate the Main Valve. 

Things to Keep in Mind While Cleaning Yourself With a Bidet

How to Use A Bidet- If the water of the bidet you are using can be made both hot and cold, then first you have to turn on the hot water. After this, when the water becomes hot, you can change its temperature according to your wish by turning on the cold water.

• High Jet of Water- While turning on the water is that you need to have control to keep the bidet jets as most of the bidets give a high-pressure stream with just a slight rotation of the control.  
• Hot and Cold Water- If you are living in extreme climates, you need to begin with cold water. Here water will not get time to. The water will not take time to heat up and if you heat the water by pressing the hot water button first, you will burn the sensitive parts of your body. 
• Nozzle Position- You should already know where the nozzle position is, otherwise the water stream can surprise you by going anywhere. 
• Spray Nozzle- If the nozzle is attached to your bidet, then to subdue the jet of water, first put your hand on top of it and then move the lever in the middle of the tap or drag it back. 

How to Use A Bidet: Which Way Should You Sit On A Bidet? 

• First, you need to get in the proper position as in the bidet, the cleaning will be done by the water stream. So you have to sit in a proper position so that the water stream can strike the exact spot. These bidets can be provided with a seat or without a seat. In case the bidets don’t have a seat you can sit on the rim of the bidet directly. 
• Bidets with jet mechanisms will help you to clean your genitals with a water stream but some bidets don’t have jet mechanisms. In such a bidet you will fill the basin through a faucet and you have to use your hands to clean yourself manually.
• In manual bidets, you have to use an external mechanism to clean your part. Turn on the water supply in the water jet nozzle by turning the water supply valve, mounted nearby your bidet seat. In such bidets, you can hardly feel the temperature of the water jet as the water jet is very narrow. In the cold, you can also use warm water in your bidets.

Ways to Clean Rear and Genitals While Using Bidet 

After knowing “How Do You Use a Bidet” in every way, now let’s read a little about hygiene. In water jet bidets the cleaning is mostly done by the water jet but in the basin bidets, you have to use your hands to clean your rear and/or genitals. In this you need to clean the area by using your hand and water, obviously afterward you have to wash your hand properly.

You can use a bidet and toilet paper to keep your area clean and well-dried. After using the bidet you can wipe out the water droplets with the help of toilet paper in order to extract moisture.

How do Europeans Dry After Using A Bidet?

Some bidets are provided with the features of “WASH”, “DRY” and ”STOP”.it has a built-in air dryer that can be used instead of toilet paper to make your genitals dry just by pressing the “dry” button. 

Some bidets are provided with a towel by the side of the bidet to make your genitals and hands dry. 

Sometimes the towel can also be used to wipe out any water splashes around the rim. If there is no towel or air jet provided you can simply use toilet paper.

How to Clean a Bidet Seat?

After using the bidet, you should also wash the basin of the bidet with light water pressure. By doing this, someone else will be able to come and use it comfortably and this thing will also show that you have good manners.

You must not forget to turn off the jets while leaving the bathroom otherwise the bathroom will get dirty and there will be a waste of water as well. 

Is Using A Bidet Healthy? 

On one hand, some studies have shown that people who are using bidets are more likely to spread fecal bacteria. But other studies have also concluded that after using the bidet, if it is not kept clean properly, then germs are produced in it, which can also spread bacteria in the genital area. 

If you are using a completely clean bidet, then the risk of spreading germs is negligible and if it was not so, then the name of the bidet could have been spoiled in today’s time. That’s why it is also your responsibility that whenever you use the bidet, do not forget to run water in it for a few seconds after that. 

After this, you should also wipe your genitals properly because the risk of infection arises due to moisture.

What are the Advantages and Disadvantages of Using a Bidet? 

Before installing a bidet in your bathroom, you should know about the pros and cons once. Some people believe that after using a bidet, it has become easier for them to clean themselves and they feel better after going to the bathroom. But some people think they may have to face problems like infection. By the way, these bidets are becoming very popular these days. Let’s know here….

Pros:

• It prevents the use of toilet paper so that we can save our environment by protecting trees.
• People who have sensitive skin can avoid the problem of irritation. 
• This cleans genitals properly.
• They come with a good period of warranty

Cons: 

• Standalone bidets need more space
• Your carelessness gets your clothes wet
• The unevenness of its nozzle leads to the risk of infection being high, especially in women.
• The renovation has to be done in the bathroom to install it.
• People who use it for the first time find it difficult to understand

Read, also- Bidet Toilet Sprayer: What is it? How to Install and Use? Full Guide 2022-23

Conclusion 

Considered effective and safe as a hygiene aid, the bidet has been adopted by many big countries like Europe, France, Italy, Portugal, Argentina, Venezuela, Japan, Spain, and many more. Doctors recommend that people need to follow strict sanitary rules when using bathroom bidets. 

Bidets are not cheap at all if you also want to install a good quality bidet in your bathroom, which will work for a long time with a warranty. It is said that the installation cost, water usage cost, and plumbing cost of bidets can go up to thousands of dollars. 

Do you still have any questions in your mind as to “How to Use A Bidet”? If yes then don’t hesitate to get back to us. We will reply to all your queries 24×7.

Frequently Asked Questions 

Q.1- Do bidets clean completely?

Ans- Yes, that’s why it is being used in many other countries like Europe, Portugal, and Argentina. People who do not use the bidet are not considered clean. Also, laws have also been made in many places to use them.

It cleans the lower part of the body very well. While it is impossible to clean so much with toilet paper. Nowadays, the option of drying is also coming in modern bidets. By the way, if you use toilet paper after using a bidet, then it is even better.

Q.2- Do you have to dry yourself after using a bidet?

Ans- Yes, after using the bidet, it is necessary to dry your genitals well. So that bacteria do not spread there when the moisture comes. The drying feature is added to the new bidets that are running nowadays.

In this, you just have to press the button, then the dryer starts. This will dry your genitals well in no time. And if you have a little old bidet in your bathroom, then you have to use towels or toilet paper. If you use a paper towel, it will give you more protection.

Q.3- Are bidets good for females?

Ans-  It is a good thing that the bidet is also safe for women. It is better if women use the front wash feature of the bidet. On taking this position, they should spray water on the genitals from front to back. This method has been told by gynecologists which do not allow the infection to form. 

After this, they should dry their genital area properly. Here, the drying system given in the bidet should be used, as sometimes due to the presence of moisture, problems like bacteria and yeast arise. You can also use toilet paper here.

Looking for a new toilet? You may want to consider a Toto. When it comes to toilets, there is one brand that stands out above the rest: Toto. Toto toilets are known for their high quality, innovative designs, and powerful flushing performance. Toto is a Japanese company that has been making toilets for over 100 years. 

From revolutionary flushing systems to eco-friendly features, Toto toilets have a toilet to suit different people with different needs. But how much do you really know about the company behind your favorite throne? Today, we are taking a closer look at the history of Toto toilets, some of their most popular models, and what sets them apart from the competition.

What Makes Toto Toilets So Special?

Toto toilets are some of the most well-known and popular toilets on the market today. They are known for their high-quality construction, cutting-edge features, and luxurious designs. But what exactly makes Toto toilets so special? Is it Toto washlet or the additional customizations they offer? Let’s take a closer look:

One of the things that set Toto toilets apart from other brands is their powerful flushing capabilities. Most Toto toilets use either double cyclone or tornado flushing technology, which helps to ensure that everything is flushed away quickly and efficiently. This is perfect for those who have a busy lifestyle and don’t always have time to clean up after themselves!

Toto toilets are also known for their efficient water usage. Many models use 1.28 gallons per flush (GPF), which helps to save both water and money in the long run. Some models even use as little as 0.8 GPF, making them even more efficient! Not to mention, using less water also helps to reduce your environmental footprint.

Finally, Toto toilets are known for their comfort and luxury features. Many TOTO toilet seats models come with bidets, air dryers, heated toilet seats, and more. This means that you can have all of the comforts of your home right in your bathroom! No matter what you are looking for in a toilet, chances are that Toto has a model that will suit your needs perfectly.

Types of ToTo Toilets You Can Go For

Here is a breakdown of the different types of toto toilets so that you can make an informed decision about which one is right for your home.

Floor Mount or Wall Mount

The first thing you need to decide is whether you want a floor-mount or wall mount toilet. Floor-mount toilets are the most common type. They are easy to install and usually less expensive than wall mount toilets. However, they can be more difficult to clean because there are more nooks and crannies for dirt and grime to build up in. Wall mount toilets are not as common, but they are becoming more popular. They are more expensive than floor-mount toilets, but they are easier to clean because there is less surface area for dirt and grime to adhere to.

One Piece or Two-Piece Toilets 

One piece toilets are easier to clean than two-piece toilets because there are no gaps or cracks for dirt and grime to build up in. However, they are usually more expensive than two-piece toilets. Two-piece toilets are the most common type. They are less expensive than one piece toilets, but they can be more difficult to clean because there are gaps and cracks where dirt and grime can build up.

Skirted Toilets or Exposed Trapway Toilets 

Skirted toilets have a sleek, streamlined look because the trapway is hidden beneath the skirt of the toilet. Exposed trapway toilets have the trapway exposed, which makes them easier to clean but less aesthetically pleasing. Skirted toilets are more popular because they offer both a stylish look and easy cleaning.

Tankless Toilets 

Tankless toilets flush differently than traditional tanked toilets. They use gravity and pressure to force water through the bowl and into the sewer line without the use of a tank. Tankless toilets typically use less water than traditional tanked toilets, but they can be more expensive to install because they require special plumbing.

Flush Types: Single Flush vs Dual Flush 

Single flush toilets flush with one button or lever push regardless of how much waste is in the bowl. Dual flush toilets have two buttons or levers—one for liquid waste and one for solid waste—so that you can choose how much water you want to use based on what you’re flushing away. Dual flush toilets typically use less water than single-flush toilets, but they can be more expensive because they have two different types of flushing mechanisms.

Round-Front or Elongated Toilets 

Round-front toilets have a circular bowl shape while elongated bowls have an oval shape. Elongated bowls tend to be more comfortable because they offer more room, but round-front bowls take up less space so they are ideal for small bathrooms. In this category, the toto drake toilet (two-piece elongated toilet) is a popular choice among homeowners and interior designers alike. The sleek design and elongated bowl provide ample room for a comfortable seating experience, while the powerful E-max flush system delivers effective flushing power with every use. 

Standard or Rimless Toilets

A standard toilet has a rim around the top edge of the bowl that collects skidmarks and other debris. A rimless toilet doesn’t have this rim; instead, it has an exposed front edge with small holes that collect debris. Rimless toilets are generally more expensive than standard toilets, but they are easier to clean because there is no rim for debris to collect in. 

How to Choose a ToTo Toilet | Things to Consider

 1. Consider Your Needs

When it comes to choosing a toilet, the first thing you need to do is consider your needs. What type of bathroom do you have? How many people will be using the bathroom? Do you have any special needs or considerations (for example, if you have a small bathroom, you might want to choose a compact toilet)? Once you have a clear understanding of your needs, you can start to narrow down your options.

2. Take a Closer Look at the Most Popular Toilet Brands and Compare

There are a number of different toilet brands on the market, but not all of them are equal. Some brands are known for their high-quality products, while others are known for their low prices. When it comes to choosing a toilet, you need to find a balance between quality and price.

Toto toilets are known for their high quality and durability. However, they also come with a higher price tag. If you are looking for a high-quality toilet that will last for years to come, Toto is a great option. However, if you are on a budget, you might want to consider another brand.

3. Read Online Reviews

Once you have narrowed down your options to a few different brands, it’s time to start reading online reviews. There are a number of different websites where you can read reviews from actual customers who have purchased and used the toilets that you are considering. These reviews can be incredibly helpful in determining which toilet is right for you. Be sure to read both positive and negative reviews so that you can get a well-rounded perspective on each product.

4. Size

There are three main heights for toilets: standard, chair-height, and mobility restricted-accessible. Standard toilets are typically between 14 and 15 inches from floor to bowl rim. Chair-height toilets are typically between 16 and 17 inches from floor to bowl rim. Mobility-restricted-accessible toilets are typically between 17 and 19 inches from floor to bowl rim.

Toto Toilet Installation | Can you Do It Yourself?

The answer is that while anyone can technically install a Toto toilet, it is highly recommended that you use the services of a professional plumber. This is because there are many complicated components to a Toto toilet. If something goes wrong during the installation process, you may end up causing serious damage to your home. Attempting to install a Toto toilet on your own may save you some money upfront, but if something goes wrong, you could end up spending much more in the long run.

Why Hire a Professional?

There are many complicated components to a Toto toilet, and if something goes wrong during the installation process, you may end up causing serious damage to your home. Professionals who are trained in installing Toto toilets will know exactly how to properly connect all of the plumbing, and they will also have the necessary tools to do the job right. Attempting to install a Toto toilet on your own may save you some money upfront, but if something goes wrong, you could end up spending much more in the long run. 

In addition, professionals who specialize in installing Toto toilets will be able to give you advice on which model would be best for your specific needs. They can also help you troubleshoot any problems that you may be having with your current toilet. Trying to fix these problems on your own could result in further damage, and it may void your warranty. 

Read, also- Guide to Purchase Toilets (18 Various Types of Toilets)

Some Last Words

All in all, the Toto toilet is a great investment for your home. It is sure to provide you and your family with many years of quality use. With its sleek design and multitude of features, it is easy to see why this product continues to be one of the most popular on the market today. 

Thank you for reading our blog on toto toilets. We hope that this information was helpful and provided you with all the necessary details to make an informed purchase. If you have any additional questions, please do not hesitate to comment below.

FAQs

Q1. What is a Toto toilet?

A bidet toilet is manufactured by Toto, Ltd. in Japan. These toilets are known for their seat warming, automatic sprays, and deodorizing features.

Q2. How much is a Toto toilet?

Toto toilets range in price from up to $250 or more, depending on the model and features.  For example, a basic model might cost $250 while a model with a soft-closing lid might cost closer to $500 or more.

Q3. How to remove Toto toilet seat?

If you need to remove the toilet seat from your Toto toilet, start by lifting up the seat to detach it from the hinges. Once the seat is detached, unscrew the bolts that attach the hinges to the bowl using a Phillips screwdriver. With the bolts removed, you should be able to lift off the entire seat and hinge assembly. If you are having trouble removing the bolts, try soaking them in WD-40 for a few minutes to loosen them up.