Nobody will ever want to deal with a falling seat. A falling seat may not be the worst problem you’ll ever face but can be very annoying when you are enjoying some peace while nature calls. So, In this post, we are going to show you the most obvious reason why your toilet seat won t stay up and ways to fix it. You just need to spend some minutes here reading and some in the toilet to adjust. We guarantee you’ll feel much better and satisfied.
Why My Toilet Seat Won t Stay Up?
A better understanding of the reasons will resolve the issue faster. So let’s get into the reasons first. Although, there are various reasons lined up for why your toilet seat won’t stay up.
Wobbly Seat
A Wobbly seat can be a reason why your toilet seat won’t stay up. Sitting on a wobbly seat can really be irritating. It is most likely to happen because of poor installation. There are a couple of bolts that make the seat and the cover in position. Loosed screws and the incorrect sizes let the seat wobble around.
Wrong Position of Toilet Lid
If your toilet lid is too far back then it may create a problem. But “how much far back” is too far back? The seat should make an obtuse angle. If not then the toilet lid will likely fall as there won’t be any support for it to stand. The angle of the seat should be more than 90 degrees if not then gravity will pull it down. You can fix this by just making a good positioning of the lid.
Toilet Level
The seat won t stay up because of the wrong toilet leveling. If you are also noticing a wobble in the seat then it is more likely a problem of disbalance. The seat will surely fall when you sit on it as you weigh on it which will make it come forward and the same as the cover on your back.
Also, read- Toilet Fill Valve: What is it? Top 5 Valves| Complete Buyer’s Guide
Thick Toilet Lid
Is your toilet lid too thick that it can’t stand properly? If yes, Then you got the cause. A heavy lid and cover will not be able to an obtuse angle and would lead to the falling of cover on your back while you are doing your thing. More material in between the lid and the seat is the reason why the problem is occurring. Here you need to remove the cover and check if it works.
Padded Toilet Seat
A padded seat with a huge distance between the lid and the pad can cause an error. For this u simply try to remove the pad this will surely resolve the issue.
Solutions To Fix a Seat That won’t Stay Up?
Now you are all aware of the problem and its causes. So let’s get into the fixes and solutions. If you have recognized the cause then you must be able to fix it quickly. You can solve your problem quickly even if you don’t have any plumbing experience. As it would hardly be taking your 10 minutes.
Leveling Up The Toilet Seat with Wedges
If your toilet is not leveled properly then it may create a disbalance which will make the lid fall. There are a lot of things through which you can manage this issue. We would recommend you use toilet wedges to level the seat. These wedges are available in local stores or you can purchase them online as well. You just need to insert these wedges and don’t forget that you do it with minimal force. If not then you will end up in a damaging wax ring. If this happens then the problem will get worse. It may result in leaking and other issues.
Tightening of Seat Screws
If your seat is wobbly around consistently then here you would need to tighten the screws that are loose over time due to daily use and residue around it. For this, you just need to tighten the screws with the help of a wrench or a flat screwdriver whichever you may need. You can check the steps below.
- Remove plastic bolt covers.
- In the bottom of the toilet locate where the plastic bolt comes through the bottom.
- Hold the nut in the bottom of the seat and then try to tighten the bolt.
- re-attach the plastic bolt covers.
Use Spacers and Buy a Proper Size of Seat
You can use the bumpers for the toilet seat to rest properly on the toilet bowl. For installing new bumpers you need to clean the toilet seat from the bottom to add bumpers.
If bumpers won’t work in your case then you would definitely need to buy a new toilet seat which should match your toilet bowl size perfectly.
You may also like- What is Toilet Gurgling? How to Fix?
Push The Seat Further Back
Last but not least, a solution that you may try on your own within less than 10 minutes. You just need to push the seat further back to get it in the perfect position. For this, you need to unscrew the bolts first. To do this better, you should follow the following steps.
- Unscrew the bolts that connect the toilet seat and the bowl
- Remove the seat and lid from the bowl
- Align the toilet seat and the lid on the bowl.
- Now, You need to reassemble every single bolt to its position.
Conclusion
In a nutshell, we have provided you with the reasons and the solution why your toilet seat won t stay up. We hope that the above guide has helped you to fix the problem. If not then you must consult some professional for it.
Frequently Asked Question
Q1. How to tighten the toilet seat?
Tightening the toilet seat is a sim[le task you can do on your own. Just follow below written simple steps.
- Remove plastic bolt covers from the lid. You can do it with the help of a screwdriver.
- In the bottom of the toilet bowl, there are bolt holes to try to locate them.
- Hold the nut in the bottom of the seat and then try to tighten the bolt.
- Now, you can attach the plastic bolt covers.
Q2. How to fix a soft close toilet seat?
If your soft close toilet seat is not working properly then you would simply need to readjust the dampers. Dampers are the major reason why the seat is not working efficiently.
Q3. How to make your toilet seat soft close?
To make the toilet seat soft close, you need to turn the hinge dampers towards the back of the toilet seat to slow it down.