Imagine this: You have just eaten a large, spicy meal and you are feeling the urge to use the restroom. You waddle into the bathroom, sit down on the toilet, and do your business. But then comes the moment of truth: you reach for the flush handle and give it a pull, but nothing happens. The water slowly begins to drain from the bowl, but your deposit remains. After a few seconds of contemplation, you make the decision to give the handle another tug, but once again, you are met with disappointment. At this point, you are probably wondering why your toilet won’t flush properly or why you are facing a slow toilet flush issue.
If your toilet flushing is weak or slow, there are several things you can do to try to improve it. But first, let’s understand why this situation happens.
6 Reasons for Poor or Slow Toilet Flush
There are many reasons for a weak or slow flushing toilet. Some most common ones are:
1. Toilet Is Clogged
One of the most common reasons for a poorly-flushing toilet is a clog. If your toilet is clogged, it won’t be able to flush properly and will leave waste behind. Unfortunately, clogs can be caused by a variety of things, from too much toilet paper to feminine products being flushed down the toilet. Luckily, most clogs can be fixed relatively easily with a plunger or a plumber’s snake.
2. Bowl Is Dirty
Another common reason for poor toilet flush is a dirty bowl. A build-up of dirt, grime, and other debris can prevent water from flowing through the bowl as efficiently as it should. This can lead to incomplete flushing and may even cause clogs. To clean your toilet bowl and prevent this problem from occurring, simply scrub it with a toilet brush and some cleaning solution on a regular basis.
3. Tank Is Dirty
In addition to a dirty bowl, a dirty tank can also lead to poor flushing performance. Over time, sediment and mineral deposits can build up in the tank and prevent water from flowing properly through the system. To clean your tank and improve its performance, simply drain it completely and scrub it with a sponge or brush on a regular basis. You may also need to descale the tank if there is extensive mineral buildup.
4. Drainline Is Blocked
Another possible reason for poor flushing performance is a blockage in the drain line (the pipe that connects your toilet to the sewer). This blockage can occur for any number of reasons, including tree roots growing into the pipe or waste buildup inside the pipe itself. If you suspect that your drain line is blocked, you’ll need to contact a professional plumber to have it cleaned out or replaced entirely.
5. Toilet Is Not on Level
Believe it or not, an unevenly installed toilet can also lead to poor flushing performance. If your toilet is not level with the ground, water may not flow evenly through all parts of the bowl when you flush it–leading to an incomplete flush. To fix this problem, simply adjust the legs of your toilet until it is level with the ground again (you may need someone else to help you hold the toilet in place while you do this).
6. Water Level in the Tank Is Too Low
If the water level in your tank is lower than normal (or if there’s no water in the tank at all), this can also lead to an incomplete or poorly flushed toilet because there won’t be enough water available to completely clear everything out when you flush it. To fix this problem, simply check the float ball and make sure it is set at the proper level; if necessary, adjust it accordingly so that there’s enough water in the tank when you flush it next time around.
Also, read- How to Unclog a Toilet Without a Plunger- 10 Quick Ways
How to Make Toilet Flush Better – Quick Ways
1. Check the Toilet Handle
The first thing you should do if your toilet isn’t flushing properly is to check the handle. Make sure that the handle is in the up position, as this will allow the proper amount of water to enter the bowl. If the handle is down, it may need to be tightened or replaced.
2. Check the Tank
Another common cause of toilets not flushing properly is a problem with the tank. If you notice that the water in the tank is not filling up all the way or that the water level is low, there may be a problem with the fill valve. This is an easy problem to fix – simply adjust the screws on the fill valve until the water level is where it should be.
3. Clean the Bowl to Fix Sow Toilet Flush
If your toilet still isn’t flushing properly after checking the handle and tank, it’s time to clean the bowl. Over time, minerals in the water can build up and create a film on the inside of the bowl. This film can interfere with the flow of water and prevent proper flushing. To clean it, simply scrub the bowl with a brush and some toilet bowl cleaner.
4. Replace Worn Parts
In some cases, toilets don’t flush properly because they have worn-out parts. If your toilet is more than a few years old, it’s likely that some of its parts need to be replaced. Common parts that need to be replaced include gaskets, seals, float balls, and flush valves. Replacing these parts is usually a pretty easy task that you can do yourself – just make sure you have all of the right tools.
5. Adjust the Flapper Chain
If there is too much slack in the flapper chain, it will prevent the flapper from sealing tightly against the flush valve opening. This will cause water to seep into the bowl, which will lead to a weak flush. To fix weak flushing toilet, simply adjust the chain so there is only about an inch of slack.
6. Clean or Replace the Flapper
If your flapper is old or damaged, it may not be sealing properly against the flush valve opening resulting in a toilet slow flush. Over time, minerals in the water can also build up on the flapper and prevent it from seating properly. To clean it, remove it and soak it in vinegar overnight. If that doesn’t work, you’ll need to replace it with a new one.
7. Clean the Jet Holes
The jet holes are responsible for propelling water into the bowl when you flush, so it stands to reason that they can get clogged from time to time. To clean them out, start by removing any debris with a toothpick or other sharp object. Then, use a narrow brush to scrub away any stubborn grime. Once you are finished, run some water through the holes to clear them out and test your flush. If it’s still not powerful enough, move on to the next tip.
You may also like- How to Fix a Running Toilet-Best 3 Methods
Reasons Why The Toilet is Making a Noise After Flushing | How to Fix?
1. Fill Valve Might be Dirty
The fill valve is what allows water to enter the toilet bowl after flushing. Over time, dirt and debris can build up on the fill valve, causing it to become less effective and leading to slow toilet flush. This can lead to your toilet making noise as it tries to refill the bowl with water. To clean the fill valve, simply remove it from the tank and clean it with a brush or cloth.
2. Float Ball might be Stuck
The float ball is another component of the toilet that helps control the water level in the tank. If the float ball is stuck, it can cause the toilet to make a noise as it tries to refill the tank with water. To fix this problem, simply remove the float ball and clean it off before putting it back in place.
3. Flush Valve might be Dirty
The flush valve is what allows water to exit the toilet bowl when you flush it. Over time, dirt and debris can build up on the flush valve, causing it to become less effective. This can lead to your toilet making noise as it tries to empty the bowl of water. Simply remove it from the tank and clean it with a brush or cloth before putting it back in place.
4. Wax Ring might be Damaged
The wax ring helps create a seal between the bowl and the drain pipe. If this seal is damaged, it can allow water to leak out, which can lead to your toilet making a noise as it tries to refill the bowl with water. To fix this problem, you’ll need to replace the wax ring with a new one.
5. Tank might be Loose
If the bolts that connect the tank to the bowl are loose, it can cause your toilet to make noise as well due to vibrations. To fix this problem, simply tighten the bolts until they’re snug but not too tight so you don’t damage them.
6. There could be something caught in the Trap Way
The trap way is what allows water to exit your toilet after flushing while also preventing sewer gases from entering your home through the drain pipe. If there’s something caught in this component, such as a toy or piece of paper, it can cause your toilet to make noise. To fix this problem, you’ll need to remove whatever is caught in order for your toilet to flush properly.
Read also- 6 Methods How to Plunge a Toilet With a Toilet Plunger
Some Last Words
Toilets are an essential part of our daily lives, and when they don’t work properly, it can be a huge inconvenience. If you are having trouble with a slow or weak or noisy flushing toilet, there are some simple things you can do to try to fix the problem. Give these tips a try the next time your toilet is acting up and see if you can get it back to working like new again.
Frequently Asked Questions
Q1. How to make my toilet flush better?
There are a few things you can do to make your toilet flush better. First, check to see if there is anything blocking the toilets’ drainpipe. If there is, remove it and try flushing again. If that doesn’t work, try adding a half-cup of baking soda to the bowl and flushing. You can also pour a half-cup of vinegar into the bowl and let it sit for 30 minutes before flushing.
Q2. Why does my toilet keep clogging?
A clogged toilet can be caused by many things, such as too much toilet paper being flushed at once or a foreign object being flushed that shouldn’t be. If your toilet keeps clogging, it’s best to call a plumber so they can determine what’s causing the issue and fix it.