• Skip to primary navigation
  • Skip to main content
  • Skip to footer

  • Home
  • Toilet
    • Best Toilet Seats
    • Best Portable Composting Toilet
    • Most Powerful Flushing Toilet
    • Best Touchless Toilet
    • 11 Best Low Flow Toilets to Save Water
    • Best Corner Toilets
    • Best Toilets That Don’t Clog
    • Best Smart Toilets
    • Toilets for Disabled Person
    • Best Comfort Height Toilet
  • Toiletries
    • Best Toilet Brush
    • Best Septic Safe Toilet Paper
    • Best Toilet Wax Ring
    • Guide to Purchase Toilet Seats
  • Water Purifier
    • Kent RO Water Purifiers Price
    • Under Sink RO
    • Water Purifiers under 5000
    • 5 Kent Water Purifier Price List
    • Non-Electric Water Purifiers
    • AO Smith Water Purifier
    • Water Purifier with hot and cold water dispenser
    • Pureit Water Purifiers Price List
    • LivPure Water Purifier Price List
    • LG Water Purifiers Price List
    • Havells water Purifier Price List
    • Bluestar Water Purifiers Price list
    • Water Purifiers in India under Rs.10000
    • Water Purifiers in India under 15000
    • Best Water Dispensers in India
    • Aquaguard Water Purifiers Price List 2022
    • Water purifiers in India in 2022
  • Guide
  • Affiliate Disclosures

Guide

Compact Toilet Dimension that Fits in Your Little Bathroom

February 1, 2022 by devid

While designing your bathroom, one of the main challenges that you might have to face is space. Putting the right thing in the right space is very important. The task gets bigger for the ones who have smaller bathroom areas and want small toilets to save some area.

If you are thinking of designing or redesigning your bathroom, but are stuck on which product to install then this blog will guide you through. First thing, you must have a rough idea before moving forward, or else this design process may get very frustrating. So, have a clear picture of how you want to transform your bathroom. The color, the curtains, the towels, the basin, and most importantly the toilet seat. Also, keep in mind that there is a limit to what a toilet seat can get. Therefore, if you have already reached the limited size of the toilet seat then, you might need to reconsider the space of your bathroom.

Tell Me the Configuration of the Small Toilets

 

small toilet dimension

Are you looking for small toilets in the markets for your tiny bathroom? But confused about how to prepare a perfect layout with all the specifications of the products? In this blog, we will thoroughly go through all types of toilet seats with different specifications and layouts. We won’t be discussing the designs and layouts in detail, but the proper specification of the toilets will definitely provide you with an idea about the shape and size of the toilets.

We will be exploring the various smallest gravity flush toilets on the market. We will also discuss different alternatives that will save some space in your bathroom area but before jumping into the products, it is important to first know your bathroom space better. The space you need to assign for different things. Below is a list of common dimensions and specifications that you should consider before designing your toilet area.

Find Out These Details to Install Small Toilets:

  • Determine the space you need to place a toilet.
  • Check the most critical dimension of the toilet, height, width, and length.
  • Do proper research on the toilets from different manufacturers.
  • Read all new inventions about the smallest toilet with gravity flush.
  • Check out the 6-floor mount gravity flush. Also, go through the specification of the 23-½ inch short Galba model toilet.
  • If none of the specifications meet your needs for the toilet then do not lose hope, there are other products too, that would help you to install one in your small bathroom.

So are you ready to explore the toilets? Let’s start the hunt!

How to Install Small Toilets Wisely to Utilise Minimum Space

 

small toilet dimension

Whether you have a big or small bathroom area, you must know where to place the toilets and how much space it needs. Therefore, the first thing you need to do is to select the place dedicated to the toilet space. It can be anywhere, it can be any dedicated bathroom area or any small space that you want to change into a restroom.

To begin with, you need to find out the least space you need to turn that area into a bathroom. While appointing a plumber you should also communicate with him and advise him to apply the minimum space rule. The minimum space rule is an important factor if you are already dealing with a small space. This rule allows you to efficiently use the area and make your bathroom comfortable to use.

A Quick Guide to Measure the Dimension:

  • The Distance between left to right= minimum of 30 inches
  • The Distance between front to back= length of the whole toilet + a minimum of 21 inches

small toilet dimension
The above specifications will help you to achieve the minimum space rule. However, it is recommended to check the local building code, since every local code is different from the others.

Dimensions of Small Toilets That You Should Consider While Buying

The height of the toilets is never an issue for small bathrooms. However, the width of the toilets should be minimum to fit in the small bathroom areas. The width should be at least 30 inches. If you have space less than that, then you must leave the idea of creating a bathroom space. Because any toilet less than that would not be comfortable to do business with. So while buying a comfortable toilet seat for your toilet, you now know what width size is best for your usage.
size of the small toilet
After discussing the width and size of the toilet, let’s now move toward the specification of the length.
If the length of your toilet is short that means the front-to-back distance of the bathroom is not much and you can not leave a clearance of 21 inches. Then you need to shift the toilet seat more towards the wall. Other than that, you can also minimize the length of the toilet to stick to the minimum rule. So before designing or restoring the toilet it is best to resort to the whole toilet design.

However, you should know that if the length of the toilet seats gets shorter then the cost of the product also gets higher. The cost depends on the inches you need to save from your bathroom. You do not need to worry, the prices are expensive but affordable. Good news, if you just want to save a few inches, about 2 to 3 inches, then a round-shaped toilet will work for you. But if you need to save more than that then get ready to empty your wallet. If spending is the only option you are left with then, we have prepared the following listicles of the best small toilets in the market.

Top Small Toilets for Your Tiny Bathroom

size of the small toilet
All those who have decided to spend a little more to give their bathroom a good look may get some amazing products in this section. Before starting your hunt for that perfect toilet for your bathroom. Here are some points you should keep in your mind.

  • All the toilets we will be discussing below are two-piece toilets with a round bowl with them. The round bowl toilets are shorter in size than the ones with elongated seats. If you are getting an elongated and two-piece toilet you can not have it less than the length of 27 inches.
  • In the elongated toilet, the size of the bowl is between 3 to 4 inches. Therefore, the round bowl increases a certain length of your toilet.

So if you are up for the above specification, then the next section has a great deal of treasure for you. You need to measure the whole length from the tip of the bowl of the toilet and the wall. However, according to the American Standard, the overall length is measured between the tank of the toilet and the wall including a clearance gap. Now, let’s jump to the table, that will provide you with a better idea about the different space-saving toilets.

Models of Toilet Seats Length (in inches) Bowl Shape

American Standard:

Model: 221DB.104.020 (Standard Bowl Height)
Colony Round Front 10 Inch Rough- In 1.28 gpf Toilet
25-5/16″ Round
Model: 221DB.004.020 (Standard Bowl Height)
Colony Round Front 10 Inch Rough- In 1.6 gpf Toilet
25-5/16 Round
Model: 215DB.104.020 (Standard Bowl Height)
Reliant 10 Inch Rough-in Round Front 1.28 GPF Toilet
25-7/16″ Round
Model: 215DB.104.020 (Standard Bowl Height)
Cadet PRO Round Front 10 Inch Rough-In 1.28 gpf Toilet
25-5/8″ Round
Model: 270DB.001.020 (Standard Bowl Height)
Cadet 3 Round Front 10″ Rough-In 1.6 gpf Toilet
25-1/2″ Round
Model: 270BB.001.020 (Comfort Height)
Cadet 3 Round Front 10 Inch Rough-In 1.6 gpf Toilet
25-1/16″ Round
Model: 3380BA.216ST.020 (Comfort Height)
Cadet 3 2-Piece 1.0/1.6 GPF Dual Flush Round Toilet
26-1/2″ Round
Model: 204BB104.020 (Comfort Height)
Edgemere Round Front 10-inch Rough-in Toilet 1.28 gpf
25-9/16″ Round
Model: K-4007-0 (Standard Bowl Height)
San Souci One-Piece Round-Front 1.28 gpf Toilet
25-5/8″ Round

TOTO:

Model: CST743S#01 (Standard Bowl Height)
Drake Two-Piece 1.6 GPF, Round Bowl Toilet
26-3/8″ Round
Model: CST453CEFG#01 (Comfort Height)
Drake II Two-Piece Toilet, Round Bowl, 1.28 GPF
26-1/2″ Round
Model: CST453CUFG#01 (Comfort Height)
Drake II Two-Piece Toilet, Round Bowl, 1.0 GPF – CeFiontect
26-1/2″ Round
Model: CST743E#01 (Standard Bowl Height)
Eco Drake Two-Piece Toilet, 1.28 GPF, Round Bowl
26-3/8″ Round
Model: CST743EN#01 (Standard Bowl Height)
Eco Drake Transitional Two-Piece Toilet, 1.28 GPF, Round Bowl
26-5/8″ Round
Model: MS853113#01 (Standard Bowl Height)
Ultimate One-Piece, 1.6 GPF, Round Bowl Toilets
26-5/8″ Round
Model: MS853113E#01 (Standard Bowl Height)
ECO UltraMax One-Piece Toilet, 1.28 gpf, Round Bowl
26-5/8″ Round
Model: CST423EFG#01 (Comfort Height)
ECO Promenade Two-Piece Toilets, 1.28 gpf, Round Bowl – CeFiontect
26-3/8″ Round
Model: CST423EF#01 (Comfort Height)
Eco Promenade Two-Piece Toilets, 1.28 GPF, Round Bowl
26-3/8″ Round
Model: CST423EF#01 (Comfort Height)
Promenade Two-Piece Toilets, 1.6 GPF, Round Bowl
26-3/8″ Round
Model: CST423SF#01 (Comfort Height)
Promenade Two-Piece Toilet, 1.6 GPF, Round Bowl
26-3/8″ Round
Model: CST405MF#01 (Comfort Height)
Rowan Two-Piece Toilet, 1.6 GPF & 1.0 GPF, Round Bowl
26-1/4″ Round
Model: CST243EF#01 (Comfort Height)
Entrada™ Close Coupled Round Bowl Toilet 1.28GPF
26-5/8″ Round

GALBA:

Model: MU113 (Standard Bowl Height)
GALBA 24.5″ Inch One-Piece Elongated  Toilets
24-1/2″ Elongated

The last product on the list is the dark horse, Galba. It is one of the most popular toilets among sellers and buyers. This model is a compact toilet that is shorter than the 24-inch length. If your bathroom is literally very small that you can not install a 24-inch toilet seat either, then you are left with this Galba product. So, grab it as soon as possible.
 In the next section, we have reviewed the little compact space-saving small toilets.

Review of GALBA  Toilet for Compact Bathroom

The Galba small toilets generally come in white in color. The size of the item is 24.5 x 14 x 27 inches. The whole product is made up of plastic.
GALBA Toilet Image

Since it is a one-piece toilet, it is very easy to clean. Due to the plastic material, it would not get any scratches or rust. There is also less chance of fading and discoloring. With a comfortable height of 16.5” and a dual Siphonic flush, the whole product weighs 90 pounds. The toilet seat is in elongated shape.

Galba Features & Specifications Overview:

Features

G-Max flushing system
Dual Flush 1.6 gpf (6 lpf) & 0.8 gpf (3 lpf)
One-piece design
Self-cleaning glazed surface
Fully glazed trapway
Skirted design for easy cleaning
Shortest length (24.5″)
ELONGATED bowl (sort of) and seat
Slow closing designer seat included
MaP rating: >=300
cUPC approved
Surpasses National GB standard cleaning water test
One-year manufacturer parts warranty

Specifications

Water consumption: 1.6 gpf (6 lpf) & 0.8 gpf (3 lpf)
Trapway type: S-trap
Water Surface 6″ x 4″ (and 5.5″ high)
Trap Diameter: 2″
Seat height: The top of the seat is 16.5″ from the floor
12″ rough-in
Material: Vitreous china
Weight: 90lbs
Dimensions: 24.5″ L x 14″ W x 27″ H

Winding Up!

Hopefully, the above guide helped you to decrease your confusion and find out the best product for your use. Before getting any product make sure you have read all the specifications very carefully.

FAQs

Which flushing system is the best?

There are a lot of brands in the market which provide you with the best flushing system. What we can suggest to you is choose a toilet which has the feature of a gravity flush system.

Do plumbers recommend dual flush toilets?

Yes, one should use it. As it saves water. So, you can simply save water and reduce water bills.

What is the best toilet in the world?

There are a number of brands available in the world. You can go with any brand which has a good market name and value.

What toilet takes up the least space?

There are various toilets that take less space. Here we can enlist some for you. these top brands have various ranges of toilets.

  1. TOTO
  2. GALBA
  3. American Standard

What makes a toilet compact?

Simple, compact toilets are toilets that take less space. Usually, they have small water bowls. piece toilet seats are meant to be compact.

How do I choose the right toilet?

Before you buy a toilet you must know what seat you need to buy, and what size you are looking for. You can simply measure the size from the wall and then extend it till you want.

Filed Under: Guide

How To Measure A Toilet Seat: Latest Guide of 2022

September 14, 2021 by devid

Have you ever experienced a sloped toilet seat or one which can’t still be fixed in a proper place? If you ever experienced this then this article is just for you. You are measuring the toilet seat in the wrong way to buy a new one. you should probably know how to measure a toilet seat to replace or set up a new one.

It is often seen that when a toilet seat is broken or rattling people eagerly want to replace it with a new best toilet seat but you get to be outdone and buy a toilet seat that looks stylish but does not fit on your toilet bowl. In this article, we will talk about “how to measure Toilet seats to buy the perfect size for the toilet bowl?”.

Although toilet seat sizes are also available in a standard size, it is still a good idea to measure your current seat before purchasing a substitute. Begin by measuring the rear to the front of the seat. If the length is approximately 16 inches, choose a regular circular seat (41 cm). Choose an elongated seat if it’s approximately 18 in (46 cm) long. If your toilet is ancient or you’re buying a specialized seat, things get a little more difficult. Irrespective of your scenario, evaluating the seat and selecting the appropriate alternative should be a breeze!

How To Measure a Toilet Seat?

There are 3 different methods to measure a toilet seat to buy a new one perfectly aligned with the toilet bowl. 

Method 1: Take the Measurement for a basic seat

Take the Measurement for a basic seat

Step 1: From either the bolts towards the front, take measurements of the seat

Put one tip of a tape measure on the bolts that attach the seat to the vase on the rear of the seat. Take measurements of the seat by drawing the other end of the line through the very point of the front of the bowl. 

  • Make sure you check down the middle of the pan. 
  • To get an actual estimation, align the meter stick with the bolt centers. Pull the acrylic conceals if required to see the bolts. Use a plain-head screwdriver to push off the lids if you can’t pry them up using your fingertips.
  • Consider the toilet seat to be a clock. From the middle of each edge, either clockwise measure the length.

Step 2: Determine the distance between both the rear of the seat’s bolts 

Determine the distance between both the rear of the seat's bolts 

  • If the bolts are hidden under flaps that haven’t been raised, pry them up using your hands or a flat-head screwdriver. Then determine the bolt spread or the distance between the mounting bolts’ centers.  
  • The usual bolt spread in the United States is 5 12 in (14 cm), however, other versions have spreads of 7 to 10 in (18 to 25 cm). If the dimensions of your toilet aren’t conventional, you might have to buy a seat directly from the manufacturer. 
  • The typical bolt spread in Europe is around 6 to 6 12 in (15 to 17 cm)

Step 3: Obtain a measurement of the seat’s breadth 

Obtain a measurement of the seat's breadth 

  • To locate the finest substitute seat, check the breadth. Place one tip of the tape measure in the center of the left edge of the seat and the other side on the right-hand side. Take measurements between the outside borders of the seats’ edges, keeping the tape centered.
  • Make sure to take your measurements from the middle of the sides, or even from 9 a.m. to 3 p.m.
  • Although toilet dimensions are standardized, there may be minor differences across brands. Unless you’re upgrading a seat, gauging the breadth will assist you in finding the best fit.

Method 2: Measuring Toilet For Special Seat

 

Measuring Toilet For Special Seat

Step 1: Measure the distance between the two bolt holes 

  • Place the meter stick in the middle of the fastener holes. As directly as possible, calculate the length between both bolt holes’ centers.
  • When purchasing a custom seat, bolt width is the most essential parameter. You may need to buy a specialized seat from the toilet’s maker if the bolt spacing isn’t an American standard toilets of 5 12 in (14 cm) or a European standard toilet of 6 to 6 12 in (15 to 17 cm).

Step 2: Take measurements and the width of the basin.

 

Take measurements and the width of the basin.

  • Bring one end of the measuring tape to the front of the bowl and align it with the centers of the bolt holes.
  • The shortest path between the bolt holes and the reservoir is required for bidet connections, elevated seats, seat warmers, and other specialized seats. 
  • Check online for specs and necessary clearances for an item you’re keen to buy before investing in a specialized seat. You don’t want to waste money on a toilet seat that doesn’t fit your toilet.

Step 3: Whether you’re purchasing a snap-on adapter, measure the current seat

 

Whether you're purchasing a snap-on adapter, measure the current seat

  • Accessible elevated chairs for individuals with impairments and toilet training seats are examples of connections. Measure the length and width of your current seat and purchase with the same specifications. 
  • Although you can identify the form of your toilet merely by gazing at it, you should still examine it to make sure the accessibility or potty learning seat fits snuggly.
  • Some additions are hinged-fixed or attached using the current seat’s mounting bolts, but most items clamp onto the seat. Assess the bolt width of your toilet, as well as the entire length of the seat, if needed.

Method 3: Select A New Toilet Seat

 

Select A New Toilet Seat

Step 1. If the length of your bowl is somewhere around 16 12 inches, choose a circular seat (42 cm) 

  • Current seat dimensions in the United States are standardized. The seat is circular if it is between 16 and 17 inches (41 and 43 cm). Further than probably, you’ll be able to find a seat from a hardware or household equipment retailer that will suit your toilet.
  • With your human eye, one can generally discern the difference between round and elongated seats but never pays to double-check. You might be able to avoid making a second visit to the shop if you take samples.

Step 2. If the bowl’s diameter is approximately 18 12 inches, use an extended seat (47 cm) 

The typical size for extended chairs in the United States is 18 to 19 12 inches (46 to 50 cm). Elongated seats are easily identified, but like circular seats, it’s a good idea to find the length, bolt spread, and breadth of the seat to be cautious.

Step 3. If you have a Euro toilet, get a seat that fits the bowl form

European bowls are often rounded, pointy, or D-shaped, and these forms are pretty straightforward to recognize. Because the normal length for each form is around 17 in (43 cm), obtaining a new seat simply comes down to knowing the right shape.

Step 4. If your toilet isn’t standard, look up the manufacturer and model 

  • While current toilet seat measurements are regulated, you may find that the proportions of your ancient toilet are entirely different. Older seats could be available online or via specialist plumbing vendors. Look for the brand and model of your toilet online, or use phrases like “toilet seat 8 in (20 cm) bolt spread.” 
  • A few modern versions have non-standard proportions as well. Corresponding toilet seats may be found online or ordered straight from the manufacturer of these toilets.
  • Remove the tank lid, turn it over, and check for a brand name and product code to determine your toilet’s model number.
  • Take a flashlight and check inside the tank for the make and model if the model cannot be found on the tank lid.

Read Also- Best Portable Composting Toilet: All The New Guide For 2022

Conclusion!

Here it is! This article concludes here. We tried our best to give you all the information about “ How to Measure a Toilet seat?” In this article, we told you about 3 different methods for 3 different toilet seats and their measurement tricks. If you are willing to buy a new toilet seat for your old toilet because the old toilet seat gets damaged then the measurement plays a crucial part before buying one. If our article helped you with its informative data then let us know in the comment section below. 

FAQs

What is the standard toilet seat size?

The standard size of a toilet seat must be 18 inches in height and 10 to 13 inches in width.

Do all toilet seats fit all toilets?

No, not all sizes are the same. You just measure the size before buying a toilet seat.

How do I know what kind of toilet seat I have?

There are two kinds of toilet seats: round and elongated. Just measure the length and the breath if it measures differently than simply it is an elongated one.

Filed Under: Guide

How To Install A Toilet: Step By Step Tutorial Guide

September 13, 2021 by devid

How to install a toilet? It may be better to upgrade your toilet if it has acquired breaks or spills, consumes far too much water every flush, or is merely a hue of bright blue you haven’t seen in two decades. You would think now is the time to contact the plumber, but for a moderately skilled DIYer, it can all be done with a day’s effort. Because toilets are heavy and cumbersome, it isn’t for the faint of heart, but if you have got a great physique (or willing assistance), you may save money on a home visit of a plumber and its team to install the toilet instead of doing it yourself. 

Before getting into the installation of a toilet you need to collect all the parts that come with handy in the package of toilet. Learn the manual to understand the basic work procedure of each and every part of a toilet. The below-explained image along with their name will help you to guide in this installation tutorial. So, learn and understand the name and work for an easy installation process.

toilet installation

Now after overviewing all the parts of the toilet you have to take one step forward towards the installation of a toilet on your own. So let’s check out the step-by-step guide to complete your work. 

How To Install A Toilet: Explained in Steps

We come up with a tutorial guide to explain every bit of the installation process of a toilet to you in a simple manner. 

1: Remove The Old Toilet

If you’re changing a toilet, you’ll get rid of the old one indeed. If the previous toilet’s flange and screws are in perfect shape, they could be recycled when setting up a new toilet.

how to install a toilet

The following is a step-by-step guide on removing an old toilet and installing a new one:

  • Turn the water off at the closed valve near a toilet, either on the walls or even on the floor.
  • To empty all of the water from the tank and toilet bowl, hit the flush button within the toilet. Plunge any residual water down the sewer line with a shovel. Drain any residual water from the reservoir with a towel and a container while wearing protective gear or gloves.
  • Using a torque wrench, remove the supply route. It may be difficult to loosen slot one or both attachment ports if the connection was never disconnected or was attached for a lengthy period of time. If this is the case, decompose any rust with a heavy-duty lube.
  • Keep a pail and cloth handy to capture any stagnant water that seeps from the distribution network and clean it up.
  • It’s typically simpler to detach the container from the bowl first if you’re operating alone. It might be hard for one individual to carry both parts simultaneously.
  • Loosen the nuts that attach the vessel’s base to the bowl with an adaptable wrench.
  • Remove the tank from the bowl by lifting it high up and setting it away.
  • Remove the commode bolt covers and release them. If required, use a screwdriver.
  • Loosen the screws and washers on the studs that attach the bowl to the ground with pliers or an extendable wrench. If the bolts are corroded in position, lubricate them with the heavily loaded grease to release them. Then, as often as possible, spin the bolts to make room at the bottom of the bolts. Remove the bolts using a hacksaw.
  • Use a utility knife to slice through the caulking seams if the toilet is silicone caulk all around the bottom.
  • Rotate the bowl back and forth slowly until it comes loose so you can remove it. To reveal the undermount sink seal, slide it to the edge.
  • Remove the old toilet seal with a putty knife. Remove any excess with a wet towel or sponge.
  • Fill the open space on the floor with a cloth to prevent gas from entering your home. Get rid of the rag before installing the new toilet.

2. Examine the Flange of the Toilet

how to install a toilet

Before you answer the question “How to install toilet?” make sure you know if the toilet flange needs to be replaced. The flange connects the ground to the toilet and serves as a critical link for the toilet’s base components. Substitute it with a similar flange if it is fractured or damaged.

3: Prepare the Floor and Soil Pipe for Installation

how to plunge a toilet

  • To stop sewage gas and avoid equipment items dropping in, put a cloth into the dirt pipe.
  • Make sure the hole on the floor is big enough to fit the pocket flange all the right up to the top. If the opening has to be bigger, use a pen to sketch all around the flange’s bottom, then use a jigsaw to slice away the extra carpeting. No rafters should be removed.
  • Dry-fit the dirt pipe into the curve in the wall. Put the flange over the soil line and calculate the length between both the finish flooring and the base of the flange’s collar.
  • Pull the dirt pipe and cut it to the prior step’s dimensions with a handsaw. Scrape the cutting edges with such a utility knife to eliminate burrs.
  • Dry-fit the flange to the soil pipe during this step and the soil pipe to the closet bend at the same time to ensure the collar of the flange sits on the floor.

4: Install the Soil Pipe and Closet Flange

how to install a toilet

  • Wipe PVC primer underneath the closet curve and outside with one side of the dirt pipe as the following step in replacing a toilet. Apply PVC cement to the identical places and bend the soil tube into the nearest curve as soon as possible.
  • The leading edge of the soil tube and the interior of the cabinet flange should be primed and cement-applied. Until the collar is placed on the ground, twist and push the socket onto the dirt tube.
  • Turn the collar only until holes on the left side of the opening are aligned. (The storage bolts should queue up perpendicular to the walls behind the reservoir when placed into the slots.)
  • Securing the collar to the floor requires stainless steel screws long enough to reach the subfloor.

Tips: Fix a PVC flange with a fixed collar before the cement hardens and align the bolt slots.

5: Place the Stop Valve Within the Wall

install a toilet

  • In this step, you are required to Turn off the water supply valve in the lavatory to conclude the question “How to install toilet?” 
  • Submerge the supply route in a container, then break it using a tube cutter. Allow roughly 1 inch of the tube for the stop valve and escutcheon to be attached. Let the water flow from the pipe.
  • Disconnect the stem and lever from the valve. (The plastic gaskets on the stems may be damaged by welding heat.)
  • Using a cloth, dry the pipe on the inside and out. To use a cord pipe cleanser, wash the inner surface outside the pipe, as well as the interior of the valve’s intake. Flux in both regions with the same amount of flux.
  • The escutcheon must be placed over the supply route, accompanied by the stop valve, with the valve’s output pointing upward.
  • With a propane torch, heat the stop valve joint on the supply line. Remove the flame from the joint as soon as it is hot enough to melt the solder. Solder is applied to a joint when a drop forms on the bottom.

6: Install the Wax Ring, Then Set the Bowl Up

Place the Wax Ring

  • The brass hardware closet nuts should be inserted threaded end up into the slot of the flange collar. Use brass washers to cover each.
  • The wax ring should be placed flat-side down over the flange and pushed in gently.
  • You need to find the holes in the base of the closet bolts to align the holes in the toilet bowl with the bolts during this process.
  • The bottom of the bowl must rest on the floor before you press the wax ring into the bowl. Do not move the wax ring or twist the bowl. If the floor is uneven, shimming the bowl might be necessary.
  • Install nylon washers over each bolt before threading the nuts. As you tighten the nuts, alternate between tightening the nut and tightening the wrench. When you find solid resistance, stop tightening the wrench; otherwise, the bowl will crack.
  • A hacksaw can be used to cut the threads on the closet and bolts two threads above the top of the nut. Snap on the plastic bolt covers.

7: Install The Tank

Place the Toilet tank

  • You have to ensure the rubber screw connecting the tank to the bowl (or spud) is securely attached to the tank.
  • Put the rubber tank washers and the tank bolts into the tiny openings in the interior of the tank.
  • The tank bolts’ ends should fit into slots on the top of the bowl as you carefully place them over them.
  • The nuts should be hand-threaded after the washers are slipped on the bolts.
  • As you tighten the bolts, rotate each nut from nut to nut and make sure the tank is level repeatedly while holding the bolt heads in place with your screwdriver. If the porcelain is overtightened, it will crack.
  • A flapper chain must be connected to the tank’s handle.

8: Assemble the Supply Line and Seats

Assemble the Toilet seat

  • Bend the supply route with a tubing stretcher to fit here between stop-valve output and the tank-supply connection. Then, with the curved end facing up, position the tube between such two locations and label half an inch underneath the outlet. This will ensure that there is an adequate line within the outlet.
  • To use a tube cutter, cut the supply route at the point mentioned previously.
  • Attach the plastic nut, compression nut, and compression ring to the supply route in that sequence. Apply a small layer of Teflon glue to the outflow screws of the valve, then insert the lines in the outlet and tighten the pressure band.
  • Screw the plastic nut on the supply line underneath the tank by hand. Then, using a wrench, tighten the compressive nut.

9: Finishing Touch

toilet installation

  • Tighten the nuts on the bolts by hand after insertion through the bowl’s seat holes and the seatback.
  • When the main supply line is switched on and the stop valve is opened, allow the tank to fill. When installing a toilet, the final step is to check for leaks six times.

How To Install A Toilet: You Need Some Tools To Do It

If you are encountering an article on “How to Install a Toilet?” then the section on the tool that explains the name and using techniques are explained will definitely take place. So here we are! This article also has that section where you will get to know about the tools you are required to install a toilet. 

  • Hack saw
  • Wax ring (if your tiles are thick, you will need an extra thick one)
  • Toilet flange repair ring (metal or plastic flange versions are available, just make sure you select the appropriate one for your existing flange)
  • Wrenches and/or pliers with adjustments
  • Drill driver/hand-held screwdrivers
  • Putty knife
  • DAP Kwik Seal Caulk
  • Toilet shims (if needed)
  • An old rag
  • Towels/sponges
  • Toilet plunger
  • Gloves

Also read: 11 Best Low Flow Toilets To Save More Water In Toilet 

Conclusion!

Hopefully, you liked this article that explains “how to install a toilet on your own without any expert assistance?”. This article has all the important aspects about the article that you are important to acknowledge for completing the tasks of installing a toilet. Within the post, we tried out best to provide you with all the steps that will help you throughout the installation process of a toilet and explain some hardware tools that going to be used in this process. If you like this article please let us know in the comment section below.  Your suggestions are precious to us.

FAQs

How to install a toilet seat?

Installing a toilet seat is a very easy process. Here we are enlisting a few steps through which you can install a toilet seat.

  1. Remove the old seat.
  2. Examine the flange of the toilet.
  3. Prepare the floor and soil pipe.
  4. Install the wax ring now you can install the tank.

How to install a basement toilet?

Basement toilets are built up with different technologies. This technology is known as an upward flushing system. You can easily install them. It is a bit of a difficult task but one can do this with the right plumbing solutions.

How long does it take to install a toilet?

It can take up to 4 hours. The Minimum time to install a toilet is 1 hour. It depends on the experience and the surroundings of the toilet.

How much does home depot charge to install a toilet?

The standard fee that home depot charges are 99 dollars. Everything is included such as the materials, labor cost and the toilet seat itself.

Filed Under: Guide

How to Snake a Toilet With The Uses of Drain Snake?

September 13, 2021 by devid

Plunger didn’t help you in fixing the clogged toilet? Use a plumbing snake to fix the issue. In case you have worked hard to fix the clogged toilet and it has clogged again after some time, it’s time to use a drain snake and unclog it properly. You may also know drain snakes as drain augers, which are very easily available. In this post, we have explained to you how to snake a toilet step by step. Check out the whole guide properly.

how to snake a toilet

Tools that You Need To Snake a Toilet

So before we explain the process to you, here are the list of all the materials that you need.

  • 20-25 foot drain auger
  • Rags
  • Drain cleaners
  • Bucket
  • Rubber gloves
  • Adjustable pliers

Steps to Prepare the Toilet to Use Drain Snakes

Now, before you snake the toilet, you need to prepare it for the process. Below we have mentioned all the steps that you need to perform to prepare it.

  • To start with, you will have to check the sink and flush it. You need to check how the water drains from these pipes. Usually, you may find a U-shaped pipe under the toilet sink. In case you have a modern toilet, a clean-out plug may be present to make it easier for you.
  • The next thing that you need to do is to take a bucket and place it under the sink. Keep the rags near you because there are chances that the water will spill out.
  • Next, in case it has a clean-out plug, use the plier and turn it clockwise. It will then help you to remove the plug properly. Other than this, if it does not have a clean-out plug, you will have to detach the U-shaped sink. For this, you will have to move the nuts on both ends. You will now have to loosen the trap properly so that there is no breakage.
  • Now, wait until the whole water is drained before proceeding with the process.
  • There are chances that the sink trap has different debris stuck that can block it completely. Clean it properly. In case you are not able to clean it and it is still blocked, you will have to use the drain snake.

Steps to Snake the Toilet with Drain Snake

Now that you have prepared the toilet properly, you can now use the snake drain to unclog a toilet. Below we have mentioned all the steps to know how to snake a toilet using a drain snake. Check out the full process below.

drain snake step to snake a toilet

  • To start with, you will have to feed the snake’s head into the pipe properly. Make sure to do this slowly lowering up to 12 inches. You will have to spin the handle of the snake drain clockwise. Also, you need to rotate it at a continuous speed.
  • You will then have to wait till you hit the obstacle. This blockage may be the reason for the clogged toilet. Make sure that you do not put the pipe very hard so that you do not damage the toilet pipe.
  • Next, when you will hit the blockage, you need to wiggle or rotate the snake drain’s head and push the blockage and try to break it. In case you hear any scraping noises, stop immediately.
  • Now, you will have to adjust the location of the drain auger’s head and then break the blockage. You will have to turn it clockwise and try to push the blockage.
  • After this, when you can remove the blockage you need to take the drain snake out and then check if there is any blockage remaining on the head of the auger. If there is, you need to clean the drain snake.
  • Now, you will have to put the tape around the thread so that you can make there is a tight seal. You will then have to screw back the plugs and assemble the tank parts.
  • In the end, you will have to start the water supply and make sure that the sink is drained properly. You will then have to flush the toilet. Other than this, there are chances that the blockage from both the drain snake and drain cleaner remove simultaneously. Make sure to use the correct products because they can damage the toilet pipes.

Cost of Drain Snake

Cost of drain snake

The drain snake is easily available for you in almost every hardware store. The cost of the drain snake is approximately 20$ or up to 50$. Other than this, if you switch to a drain auger, you will have to pay a bit more for it.

You can also read- Best Tankless Toilets Reviewed By Expert

Winding Up

So, all the steps mentioned above will help you to know how to snake toilet easily. In case you are still not able to unclog the toilet, you can seek help from a professional plumber. We hope that this article was helpful.

FAQs

How much does it cost to snake a toilet?

It can range between 20 to 50 dollars. If you switch to the drain anger then it could cost more.

How to get rid of a snake in a toilet?

For this, you can use homemade solutions such as caustic soda, sulfur powder, etc. There are more ways to prevent snakes from appearing in the toilet as kerosine oil and engine oil.

Where do you put a snake in a toilet?

You can simply do it. You can put the snake in the seat through its opening. It is used only when the clogging is unable to clear with a plunger.

Filed Under: Guide

How Does a Composting Toilet Work With No Flush

September 11, 2021 by devid

Composting toilets are widely famous for their natural way of evaporation and decomposition. Through this process, they help in recycling human-excreted material. Since the human body is made up of 60% of water so the waste has almost 90% of water presence. This water by using the vent method gets evaporated into the atmosphere. Now, the only material that is left behind becomes transformed into fertilizing soil. You may hear of this procedure called natural decomposition. 

Composting Toilets: What are They?

composting toilet

Composting toilets are dry flush toilets that support environmental behaviors by naturally decomposing waste. As per the research, there require 1.6 gallons of water per flush (GPF). Every one of us has flushed around 5 times a day which means it uses 2,336 gallons of water per year. The compost toilet helps to mix the waste with other environmental-friendly items like peat moss, and sawdust. With the venting procedure, the air moves upward which works for eliminating this odor.    

There is no fear of any kind of viruses and illnesses developed from these composting toilets because the bacteria properly compost the human-excreted material. The product you will receive through this process is free from any viruses. That means they are properly natural and you can use them on your plants and trees to provide them with the best nutrients. They work wonderfully as natural fertilizers and maintain the proper health of our environment. The benefits of using these natural fertilizers do not end here as they preserve the water quality too. 

If you are in search of a composting toilet then make sure to check out these three essential functions. First, it helps in composting the toilet paper as well as the waste in the quickest time without arising any foul smell. Secondly, it evaporates 90% liquid contained in the waste, and lastly, it makes sure that the last product is purely easy and safe. 

Well, you may hear many stories of different people who want to get successful in building these kinds of toilets but none of them get the desired result as Sun-Mar. This group is properly-known for its elegant manner of building bio-drums. You can consider them the forerunners of this kind of toilet. 

How Do Composting Toilets Really Function?

how does a composting toilet work

Well, in the introductory part, we have provided you with a brief about composting toilets and their working procedure. But, there are some consideration points that you need to know in this section. With this, you would better get to know about its working capability. So, let’s get into this section and learn how this composting toilet functions. 

You should place the composting toilet in the right environment. That means you need to search for a place where the aerobic bacterias dwell. Well, these bacterias live in a place that maintains a proper balance between carbon and nitrogen or the temperature is moisture. 

If the environment has too much moisture then it can bring obligate aerobic bacteria. Make sure that you never leave your toilet wet. It should be moist to carry out the further procedure. To avoid oxygen-breathing bacteria, composting toilets come with a split container that is used for urine waste. It needs to be emptied properly whenever it is filled. 

There are other models also that come with a drain-pit or different things for evaporating the liquid of the waste material. Well, the procedure does not end here, when the urine gets disposed of, it helps in removing the extra buildup of nitrogen. Also, coconut fiber and peat maintain the correct balance between nitrogen and carbon. Just after this process, aerobic bacterias grow at 60-100 degrees Fahrenheit temperature and thus proceed with the further task.

Where You can use the Composting Toilets

compost toilet

You are provided two designs for composting toilets self-contained design and a remote toilet. You can find the first one on boats, tiny houses, cabins, or RVs. They help in housing the full composting system beneath the bowl. The installer needs to remove them with their own hands after getting the temporary use. 

A remote or central toilet provides two specific ways for solid and liquid waste. Well, the larger system you have the more it will help in connecting several toilets used in your large compounds or homes. 

The Reason why Composting Toilet is better than a Septic Tank? 

Septic tanks arrive as the savior for different communities but there are certain issues with them. For instance, you will find them more expensive which proves to be hard. It would fetch you problems and issues due to their maintenance cost. Not only they can clog at any time but also produce an undesirable odor in your surrounding. 

On the other hand, a composting toilet is quite a better option for its capability to work as an environment-friendly tool. That not only saves water from being consumed during flush but also maintains the decorum of nature by providing plants and trees the natural fertilizers. 

What is the Cost of Composting Toilets

dry flush toilet

The starting price of a composting toilet goes around $600. BoonJon is the basic model of this kind of toilet. If you want to get more advanced features within your toilet then you must spend some more thousands of dollars. 

Despite being a natural-friendly toilet, many people avoid installing it in their homes and compound areas because of the dedication it demands from the consumer. There has to be the right temperature that fits best for aerobic bacteria. It also proves to be a little more expensive than an ordinary toilet because of its maintenance cost. 

Well, here is a pricing list of different models of this kind of toilet. You can learn about each of them in the list provided below. 

  • The self-contained compost toilet is estimated at $1,400
  • If you want to purchase a septic toilet then you have to spend 75% more from your pocket.
  • “Build it Yourself” is the last model. It costs around $50 because of the involvement of human efforts in the installation procedure.

Advantages of a Composting Toilet

composting toilets : advantages

  • The water usage becomes reduced.
  • Decrease the possibility of marine pollution. 
  • You can compose not just human waste but bathroom and kitchen waste as well. 
  • The land becomes developed and fertilized by using this toilet. 
  • Helps in detecting water pollution. 
  • The maintenance cost required in your household becomes cut down. 
  • Support you to defeat the conventional mode of sewage and plumbing system.
  • Negative environmental impact becomes reduced to some extent. 

Disadvantages of a Composting Toilet

  • The person needs to remove the waste manually. 
  • At times, it requires an electric source. 
  • It is not as pleasing as you thought. 
  • Odors become produced when you do not correctly install them. 
  • Smaller units generally do not accept the huge amount of waste

Conclusion!

Composting toilets is a new way of settling the hurdles going on in the environment. Yet, it requires some of your hardships but the result it brings is just commendable. It adds more beauty to nature by providing natural fertilizers. In the post above, we have included almost every tiny detail so take your decision wisely by looking into these points. It is a good win for everyone who wants to safeguard nature. 

Well, this entire process is not that different and unique. You can find the same in your garden area. It is just developed and emerged in front of us through these dry flush toilets. Bacteria work together to decompose the material and find a proper combination of moisture, organic material, oxygen, and heat. Thus, it provides success in the procedure of getting a healthy environment.

FAQs

How does a composting toilet work?

A composting toilet has a different type of technology. It uses an aerobic decomposition method to break down human waste rather than flushing it away in watery sewage.

How to empty composting toilet?

You can take the tray away to a large compost pit. And throw the waist there. You must clear this around every 2 months, depending on your usage.

What to do with composting toilet waste?

You can dump it in the compost pit. Place the waist in the compostable bag then throw it into the dumpster.

Filed Under: Guide

  • « Go to Previous Page
  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to page 4
  • Go to page 5
  • Interim pages omitted …
  • Go to page 8
  • Go to Next Page »

Footer

Recent Posts

  • Toilet Auger: How To Use a Toilet Auger? Everything You Need To Know
  • Can You Use Drano in a Toilet? Here’s Everything You Need To Know
  • How to Turn Off Water to Toilet? All Possible Solutions | Simple Tricks
  • How to Use A Bidet? Hygiene & Etiquettes Rules | Tips You Should Never Forget!
  • Best Toto Toilet To Buy | Complete Guide (Latest Features)

Quick Links

About Us
Contact Us

Disclaimer

Copyright © 2022 – All Rights Reserved. Contact Us. Here we just give you an aide on the best way to get knowledge, it implies we are alluding to substance that are uninhibitedly accessible and overstep no regulation. All the Content is only for information purposes.